Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual SMEG KE61X. We hope that this SMEG KE61X user guide will be useful to you.
Lastmanuals help download the user guide SMEG KE61X.
Detailed instructions for use are in the User's Guide.
[. . . ] · Check that the mains voltage corresponds to that indicated on the rating plate fixed to the inside of the hood. · For Class I appliances, check that the domestic power supply guarantees adequate earthing. [. . . ] By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.
EN
9 9
CHARACTERISTICS - INSTALLATION
FIXING OF THE HOOD UNDER THE CABINET · To drill the cabinet follow the indications given in the dimensional drawing in the chapter which regards hood dimensions. · To fix the hood onto the cabinet use the 44, 4 mm long screws inserting and tightening them from the inside of the cabinet.
Connection to air outlet
AIR OUTLET IN THE DUCTING MODE
When installing the hood in ducting version, basing on the installer's choice, a rigid or a flexible pipe is used in order to connect the hood to the air outlet piping. · Insert the flange on the hood body outlet. · Open the metal grid and make sure that the conversion knob is in the ducting position. · Connect the hood to the air outlet piping with a pipe. · Fix the pipe with an adequate quantity of pipe clamps. This material is not supplied together with the hood. · Remove the charcoal filter if present.
EN
1 10 0
AIR OUTLET IN THE RECYCLING MODE
· Open the metal grid and make sure that the conversion knob is in the recycling position. The charcoal filter is not supplied together with the hood. (Hoods with two motors needs to be equipped with two charcoal filters).
INSTRUCTIONS FOR OPENING AND REMOVING THE METAL GRILLE PANEL · To open the grille, pull the facia panel out into the operating position. · Press inwardly on the two slide catch fastners, located at each side of the grille near the facia panel, while pulling the grille panel onwards. [. . . ] The charcoal filter cannot be cleaned and should be replaced at least every six months or more frequently if the hood is used consistently. To replace the charcoal filter, support the filter with one hand, remove the round disk through the centre of the charcoal filter and rotate it till the filter will come away . [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE SMEG KE61X
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual SMEG KE61X will begin.
