User manual SMEG KV90X

[. . . ] The kitchen must have an opening communicating directly with the open air in order to guarantee the entry of clean air. USE The extractor hood has been designed exclusively for domestic use to eliminate kitchen smells. Never use the hood for purposes other than for which it has been designed. Never leave high naked flames under the hood when it is in operation. [. . . ] Secure the sides to the brackets using the 4 screws 12c (2, 9 x 9, 5) supplied. Lower exhaust Chimney Slightly widen the two sides of the chimney and hook them between the upper chimney and the wall, making sure that they are well seated. Fix the lower part laterally to the hood body using the 2 screws 12c (2, 9 x 9, 5) supplied. 2. 1 2 2. 2 7. 2. 1 12c 12c EN 1 16 6 USE L1 L2 L3 L4 L T1 T2 Control panel T3 T4 Button L Function Led Press briefly to turn the lighting system on and off. 2 seconds to turn the lighting system on and off at reduced intensity. Turn the suction motor on and off at speed one. If the filter saturation alarm is on, this resets it. If the filter saturation alarm is on, this resets it. Press once to turn the suction motor on and off at speed three. Press again to activate intensive speed. This speed is timed to run for 10 minutes. At the end of this time the system will Flashing. automatically return to the speed set before. Suitable to deal with maximum levels of cooking fumes, it is deactivated by pressing any one of the Speed buttons (T1-T2-T3). It cannot be activated if the Delay function is in use. [. . . ] CHANGING THE ACTIVATED CHARCOAL FILTER Resetting the alarm signal Press any of the buttons except the Light button. Changing the Filter Remove the Metal grease filters. Remove the saturated Activated Charcoal filter, as shown in the figure. [. . . ]