User manual SMEG PGF32GD

[. . . ] IT IS IMPORTANT TO CAREFULLY READ THIS MANUAL AND ALL THE INSTRUCTIONS CONTAINED HEREIN BEFORE USING THE APPLIANCE. INSTALLATION MUST BE CARRIED OUT BY COMPETENT PERSONS IN ACCORDANCE WITH THE REGULATIONS IN FORCE. THIS APPLIANCE IS INTENDED FOR HOUSEHOLD USE AND COMPLIES WITH THE EEC DIRECTIVES CURRENTLY IN FORCE. THE APPLIANCE HAS BEEN BUILT TO CARRY OUT THE FOLLOWING FUNCTIONS: COOKING FOOD; IT IS CONSIDERED UNSUITABLE FOR ANY OTHER USE. [. . . ] DO NOT LET CHILDREN GO NEAR THE APPLIANCE WHEN IT IS IN OPERATION OR PLAY WITH IT AT ANY TIME. DO NOT INSERT POINTED METAL OBJECTS (CUTLERY OR UTENSILS) INTO THE SLITS IN THE APPLIANCE. DO NOT USE STEAM JETS FOR CLEANING THE APPLIANCE. THE STEAM COULD REACH THE ELECTRONICS, DAMAGING THEM AND CAUSING SHORT-CIRCUITS. DO NOT MODIFY THIS APPLIANCE. DO NOT SPRAY ANY SPRAY PRODUCTS NEAR THE ELECTRICAL APPLIANCE WHILE IT IS IN OPERATION. DO NOT USE SPRAY PRODUCTS WHILE THE PRODUCT IS STILL HOT. The manufacturer cannot be held liable for damage to persons or things caused by failure to observe the above instructions, by interference with any part of the appliance or by the use of non-original spare parts. 27 Instructions for disposal 3. ENVIRONMENTAL RESPONSIBILITY 3. 1 Our environmental responsibility Pursuant to Directives 2002/95/EC, 2002/96/EC and 2003/108/EC relating to the reduction of the use of hazardous substances in electrical and electronic appliances, as well as to the disposal of refuse, the crossed out bin symbol on the appliance indicates that at the end of the useful life of the product, it must be collected separately from other refuse. Therefore, at the end of the products working life, the user must deliverit to the appropriate differentiated collection centres for electrical and electronic waste, or deliverit back to the retailer when purchasing an equivalent product, on a one-for-one basis. Adequate differentiated collection for the subsequent forwarding of the decommissioned product to recycling, processing and ecologically compatible disposal contributes to avoiding possible negative effects on the environment and on health, and promotes recycling of the appliances constituent materials. Illicit disposal of the product by the user will lead to the application of administrative sanctions. The product does not contain substances in quantities sufficient to be considered hazardous to health and the environment, in accordance with current European directives. 3. 2 Your environmental responsibility Our productspackingismadeofnon-polluting materials, which are therefore compatible with the environment and recyclable. Please help by disposing of the packaging correctly. You can obtain the addresses of collection, recycling and disposal centres from your retailer or from the competent local organisations. Take the greatest care when using fats or oils since they may catch fire if overheated. If the burner flame accidentally goes out, turn off the control knob and wait at least 1 minute before trying to re-light the burner. To prevent burns or damage to the hob or top during cooking, all pans or griddles must be placed inside the perimeter of the hob. 5. 3 Pan diameters HOB BURNER Ø min. (in cm) 12-16 18-24 22-26 2 3 1 1 Auxiliary 2 Rapid 3 Dual crown The wok support rack supplied can be used as a raised pan support on burners 1 and 2 ONLY, and for "woks" on burners 2 and 3 ONLY. 31 Instructions for the user 6. CLEANING AND MAINTENANCE Before performing any operations requiring access to powered parts, switch off the power supply to the appliance NEVER USE A STEAM JET FOR CLEANING THE APPLIANCE. 6. 1 Cleaning stainless steel To keep stainless steel in good condition it should be cleaned regularly after use. 6. 1. 1 Ordinary daily cleaning To clean and preserve the stainless steel surfaces, use only specific products that do not contain abrasives or chlorine-based acids. How to use: pour the product onto a damp cloth and wipe the surface, rinse thoroughly and dry with a soft cloth or chamois leather. 6. 1. 2 Food stains or residues Do not use metallic sponges or sharp scrapers as they will damage the surface. Use ordinary non-abrasive products for steel, with the aid of wooden or plastic utensils if necessary. Rinse thoroughly and dry with a soft cloth or chamois leather. 32 Instructions for the user 6. 2 Cleaning the cooking hob parts For easier cleaning the pan stands, burner caps, flame spreader crowns and burners can all be removed; wash them with warm water and a nonabrasive detergent making sure to remove any encrustation, then wait until they are completely dry. Replace caps on the relative crowns, making sure that the flame spreader crowns are correctly in place with their respective burner caps and ensuring that the holes A in the flame-spreaders are aligned with the igniters and thermocouples. A For dual burner UR2, place and lock caps G and F perfectly on burner D. [. . . ] Make sure that the feed pressure complies with the values indicated in the table at point "8. 2 Burner and nozzle characteristics table". 38 Instructions for the installer 8. ADAPTATION TO DIFFERENT TYPES OF GAS Before carrying out the following operations, disconnect the appliance from the power supply The appliance is preset for natural gas G20 at a pressure of 20 mbar. In the case of operation with other types of gas, the burner nozzles must be changed and the minimum flame adjusted on the gas taps. To change the nozzles, proceed as described in the following paragraphs. 8. 1 1 2 3 4 Replacement of nozzles on the hob Extract the pan racks and remove all the caps and flame-spreader crowns; Unscrew the burner nozzles with a 7 mm socket spanner; Replace the burner nozzles according to the type of gas to be used (see "8. 2 Burner and nozzle characteristics table"). [. . . ]