User manual SMEG SAP3700X

[. . . ] • Children must never play with the appliance. • Never rest metallic objects such as knives, forks, spoons and lids on the appliance during use. • Switch the appliance off immediately after use. • Never try to put out a fire or flames with water: turn off the appliance and smother the flames with a fire blanket or other appropriate cover. [. . . ] Turn the control knob to the right or left to select proving from the “special functions” menu. While the function is in progress, it is possible to set a timer for a maximum of 4 hours (see “Timer during function”), a proving duration (see “Timed cooking”) or a delayed proving (see “Delayed cooking”). Press the control knob to make the required changes. 22 Use Unless otherwise set, the proving will have a maximum duration of 13 hours. The light inside the oven will remain off during the proving function. At the end of the cooking time “function ended” appears on the display and a buzzer will sound that can be deactivated by pressing the control knob. Turn the control knob to the right or left to select food warming from the “special functions” menu. Press the control knob to activate the function, or turn it to adjust the pre-set temperature (from 40° to 80°). It is not possible to modify the temperature of the proving function. Position the tray on the first shelf and place the plates to be warmed in its centre. 4. It will then proceed with the selected function. Do not stack plates too high. Stack plates a maximum of 5/6 high. 23 EN IT Use 6. While the function is in progress, it is possible to set a timer for a maximum of 4 hours (see “Timer during function”), a warming duration (see “Timed cooking”) or a delayed warming (see “Delayed cooking”). Press the control knob to start cooking. 26 Use 1. When the preset program has finished, the appliance will warn the user with buzzers and the flashing symbol. Inside the selected preset program, turn the control knob to the left or right to select change from the menu of the selected dish. Press the control knob to perform cooking with the same parameters currently set (press the knob twice if the buzzer is active). The appliance will automatically restart cooking if it is at the correct temperature; otherwise it will also resume preheating. Cooking in sequence is useful to cook multiple dishes of the same type. For example, it can be used to cook several pizzas in a row. It is not recommended to place the dish in the oven during the automatic pre-heat stage. Press the return knob to exit and end the preset program. 2. Turn the control knob to the right or left to select the function to associate with the preset program. Press the control knob to confirm. 3. [. . . ] After the automatic cleaning cycle (pyrolyric) it is not possible to select a function: • Verify whether the door lock has deactivated. If it has not, the oven has a safety device that does not allow functions to be selected while the door lock is active. This is because the temperature inside the oven is still too high to permit any type of cooking. If the problem has not been resolved or in the case of other types of fault, contact your local technical support centre. If other Error XX error messages are indicated: note down the error message, function and set temperature and contact your local technical support centre. 47 EN IT What to do if. . . The display shows “Error 4”: • The door lock has not properly attached to the door. [. . . ]