User manual SMEG SC0485X-8

[. . . ] INSTRUCTIONS FOR USE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 SAFETY PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 ENVIRONMENTAL RESPONSIBILITY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 GET TO KNOW YOUR OVEN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The appliance will restart its normal operation with the previously selected cooking settings. To switch off the appliance, turn the function selection knob to "0". 6. 9. 2 Modifying the set data Once semi-automatic cooking has started, its duration can be changed. When is steady and the appliance is in the cooking phase, press the temperature selection knob. will start to flash and the preset cooking time can be changed by turning the knob right or left. 64 Instructions for the user 6. 9. 3 Automatic cooking Automatic cooking is the function which allows a cooking operation to be stopped at an established time depending on the time set by the user, after which the oven will switch off automatically. Select a cooking function as described in "6. 7 Selecting a cooking function". Press the temperature selection knob twice. The display will show the digits and (flashing). Turn the knob right or left to set the number of minutes of cooking from 00:01 to 12:59 (keep the knob turned to increase or decrease more quickly). A few seconds after selecting the desired period, will stop flashing and from that point it is possible to press the temperature selection knob to set the cooking end time. For safety reasons, when setting automatic cooking the user must first program a cooking duration and then set the cooking start time. It is not possible to set the cooking start time only, without setting the cooking duration. will appear together with the cooking end time. To alter the value, turn the knob right or left. A few seconds after the last button is pressed, and will stop flashing and from that point the appliance will wait for the cooking start time. 65 Instructions for the user When cooking is complete, the word STOP will appear, cooking will be interrupted and a buzzer will sound which can be deactivated by pressing the temperature selection knob. To extend the cooking time manually (if the food has not been cooked properly), press the temperature selection knob. The appliance will restart its normal operation with the previously selected cooking settings. 6. 9. 4 Modifying the set data When and are steady, press will the temperature selection knob. start flashing; turn the knob right or left to change the set time. Press the temperature selection knob again, out, will go will start flashing and the cooking end time will be displayed. The cooking end time can be put back by turning the knob right or left. A few seconds after the last change, and will appear (in steady mode) and automatic cooking will restart with the new settings. Once cooking has been programmed, before it starts, the symbol of the selected function will remain on, as will the symbols , . 66 Instructions for the user 6. 10 Secondary menu The appliance also has a concealed secondary menu allowing the user to: · · · Activate or deactivate the child lock mode. Activate or deactivate Showroom mode (which disables all the heating elements so that only the control panel works). Activate or deactivate low power mode. When the appliance is in Stand-By mode, hold down the temperature selection knob for at least 5 seconds. The setting (ON / OFF) can be changed by turning the temperature selection knob right or left. Press the temperature selection knob to go to the next setting. 67 Instructions for the user 6. 10. 1 Child lock mode By activating this mode, after one minute of operation without any intervention from the user, the controls will automatically be locked, indicated by lighting up. To temporarily release the lock during cooking, hold down the temperature selection knob for 5 seconds. One minute after the last setting the lock will become active again. If the symbols on touch-sensitive zones are pressed or the positions of the thermostat knob and function selection knob are changed, the word "BLOC" will appear for two seconds. 6. 10. 2 Show room mode (for exhibitors only) By activating this mode, the oven deactivates all the heating elements, while keeping the control panel active. To use the oven normally, set this mode to OFF. 6. 10. 3 Low power mode Activating this mode limits the power used by the appliance. HI ; normal power - LO ; low power Activating low power mode means that preheating and cooking times may be extended. 68 Instructions for the user 7. COOKING WITH THE OVEN ECO: Using the grill and the lower heating element in combination is particularly suitable for cooking on a single runner only, as it provides low energy consumption. STATIC: As the heat comes from above and below at the same time, this system is particularly suitable for certain types of food. [. . . ] Remove the middle panel by lifting it upwards. Cleaning: · It is now possible to clean the external glass panel and the panels removed previously. In the case of stubborn dirt, wash with a damp sponge and neutral detergent. Replacing the glass panels: · Replace the panels in the opposite order to which they were removed. · Reposition the internal glass panel, taking care to centre and insert the 4 pins attached to the glass into their slots in the oven door by applying slight pressure. 85 Instructions for the installer 10. INSTALLING THE APPLIANCE 10. 1 Electrical connection The identification plate bearing the technical data, serial number and brand name is visibly positioned on the appliance. [. . . ]