User manual SMEG SD7205SLD2P

[. . . ] Cleaning and user maintenance shall not be made by children without supervision. This appliance is intended to be used in household and similar applications such as: – Farm houses; staff kitchen areas in shops, offices and other working environments – By clients in hotels, motels, bed and breakfast and other residential type environments Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction. General Safety • • 16 • • • • • • • Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer. Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer. Do not use water spray and steam to clean the appliance. [. . . ] • Do not cause damage to the part of the cooling unit that is near the heat exchanger. 18 OPERATION Control Panel 1 6 5 4 3 2 1 2 3 4 Display Temperature warmer button Temperature colder button OK 5 Mode 6 ON/OFF It is possible to change predefined sound of buttons to a loudly one by pressing together Mode and temperature colder button for some seconds. Change is reversible. Display A B C D A. Timer indicator Shopping function Holiday function Temperature indicator Alarm indicator ChildLock function DrinksChill function G F E Switching on 1. Connect the mains plug to the power socket. Press the appliance ON/OFF if the display is off. The temperature indicators show the set default temperature. To select a different set temperature refer to "Temperature regulation". If "dEMo" appears on the display, refer to "Troubleshooting" . Switching off 1. Press the appliance ON/OFF for 5 seconds. Disconnect the mains plug from the power socket. Temperature regulation Set the temperature of the appliance by pressing the temperature regulators. Default set temperature: • +5°C for the fridge The temperature indicators show the set temperature. 19 The set temperature will be reached within 24 hours. Gradually pull the shelf in the direction of the arrows until it comes free. Do not move the glass shelf above the vegetable drawer and the bottle shelf to ensure correct air circulation. Temperature indicator For proper storage of food the refrigerator is equipped with the temperature indicator. The symbol on the side wall of the appliance indicates the coldest area in the refrigerator. Movable shelves The walls of the refrigerator are equipped with a series of runners so that the shelves can be positioned as desired. If OK is displayed (A), put fresh food into area indicated by symbol, if not (B), adjust the temperature controller to a colder setting and wait 12 hours before checking the temperature indicator again. A OK OK B 21 After putting fresh food into the appliance or after opening the door repeatedly or for a long period, it is normal for the indicator not to show OK; wait at least 12 hours before readjusting the temperature controller. HINTS AND TIPS Normal operating sounds The following sounds are normal during operation: • A faint gurgling and bubbling sound from coils sound when refrigerant is pumped. • A whirring and pulsating sound from the compressor when refrigerant is pumped. • A sudden cracking noise from inside appliance caused by thermic dilatation (a natural and not dangerous physical phenomenon). • A faint click noise from the temperature regulator when the compressor switches on or off. • do not store warm food or evaporating liquids in the refrigerator • do cover or wrap the food, particularly if it has a strong flavour • position food so that air can circulate freely around it Hints for refrigeration Useful hints: • Meat (all types): wrap in a suitable packaging and place it on the glass shelf above the vegetable drawer. • Cooked foods, cold dishes: cover and place on any shelf. • Fruit and vegetables: clean thoroughly and place in a special drawer. Bananas, potatoes, onions and garlic must not be kept in the refrigerator if not packed. • Butter and cheese: place in a special airtight container or wrap in an aluminium foil or a polythene bag to exclude as much air as possible. [. . . ] Food products prevent that water flows into the water collector. This is correct. Clean the water outlet. Make sure that food products do not touch the rear plate. Attach the melting water outlet to the evaporative tray. Water flows on the floor. The melting water outlet is not connected to the evaporative tray above the compressor. The FastFreeze or Shopping function is switched on. Temperature cannot be set. Switch off FastFreeze or Shopping manually, or wait until the function resets automatically to set the temperature. [. . . ]