User manual SMEG SDP20UL

[. . . ] IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2. THE ENVIRONMENT - DISPOSAL INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 3. USER RECOMMENDATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 4. SUGGESTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 5. [. . . ] GETTING TO KNOW YOUR APPLIANCE HUMIDIFIER WATER TANK CONTROL PANEL SLIDING TRAYS PLANT POTS VAPOR DELIVERY TUBE LED LAMP HUMIDITY AND INTERNAL TEMPERATURE SENSOR TANK FILLER CAP HEATING PLATES (FIG. 8) EXTERNAL LIGHT SENSOR INTERNAL CLOCK SETTING/DISPLAY SYMBOL HUMIDITY SUPPLY/EMPTY TANK SYMBOL INTERNAL TEMPERATURE/TIME DISPLAY STANDBY SYMBOL INTERNAL AIR HUMIDITY PERCENTAGE/MINUTES DISPLAY REMOTE CONTROL LOCK SYMBOL LED LAMP MAXIMUM LIGHT SYMBOL CUTTINGS FUNCTION SYMBOL REMOTE CONTROL INFRARED SENSOR 8. 1 External light sensor This sensor detects the environmental light level also controlling the lamp on or off during lighting period set with the program. 8. 2 Internal clock setting/display symbol This symbol indicates that the key on the remote control has been pressed to show the current time on the displays. For instructions for setting the time, see "9. 6 Clock display/setting key" 8. 3 Humidity supply/empty tank symbol This symbol lights up whenever the key on the remote control is pressed. It flashes when the water tank level goes into reserve and the humidifier is no longer able to deliver the required vapor. For filling the water tank, read paragraph "11. 1 Filling the tank". In normal operating conditions, the tank will ensure correct humidification for 25-30 days. This value is approximate and will depend on the climatic conditions and program selected. 15 Control panel 8. 4 Internal temperature/time display During normal operation, this displays the Home Garden's internal temperature. When first switched on, after a power shutdown or when the key is pressed, the display shows the time for setting. For instructions for setting the time, see "9. 6 Clock display/setting key" The Home Garden does not have a cooling function. It follows that the internal temperature will never be lower than the external temperature. 8. 5 Standby symbol When this is the only symbol lit up on the control panel, the appliance is in standby. 8. 6 Internal air humidity percentage/minutes display During normal operation, this displays the Home Garden's internal relative humidity (in %). When first switched on, after a power shutdown or when the key is pressed, the display shows the time for setting. For instructions for setting the time, see "9. 6 Clock display/setting key". The Home Garden does not have a dehumidifying function. It follows that the internal humidity will never be lower than the external humidity. 8. 7 Key lock/unlock symbol When the remote control has not been used for ten minutes consecutively, the Home Garden locks its current setting and commands are not accepted from the remote control. This is a precaution against misuse, accidental or in play, by children, who may attempt to change the settings and thus affect the growth of the plants. For instructions for deactivating the lock, see "9. 2 Standby key". 8. 8 Internal light ON symbol This symbol lights up whenever the key of the remote control is pressed, and stays on for around a minute during day time, and an hour at night. It can be switched off manually at any time by pressing the key when it is on. For instructions for the internal lighting function, see "9. 5 Internal light key". 8. 9 Cuttings function on symbol This symbol indicates that the "Cuttings" function is activated. If it is flashing, this means that the climatic conditions do not allow for activating the function. For instructions for the "Cuttings" function, see "9. 3 Cuttings function on key". 8. 10 Remote control sensor This sensor receives the signals emitted by the remote control whenever its keys are pressed and sends them to the control circuitry, which activates the corresponding components. Ensure that it is never blocked by any obstacles: they will block the signals from the remote control. 16 Remote control 9. THE REMOTE CONTROL RED LED STANDBY KEY "CUTTINGS" KEY HUMIDIFIER KEY INTERNAL LIGHT KEY CLOCK DISPLAY/SETTING KEY VALUE DECREASE KEY VALUE INCREASE KEY (Fig. [. . . ] Extract the sliding trays and pots as described in paragraph "10. 1 Removing and placing the pots in the Home Garden". With the trays and pots extracted, remove cap "A" by lifting it off as shown in the figure. Use a garden watering can to slowly fill the tank through hole "B". A float inside the tank slowly rises as the water level increases and indicates when the tank is full. [. . . ]