User manual SMEG SE2644ID1

[. . . ] 8. INSTRUCTIONS FOR USE ______________________________________________ 18 SAFETY INSTRUCTIONS _______________________________________________ 19 BEFORE FIRST USE___________________________________________________ 20 DESCRIPTION OF CONTROLS ON THE FRONT CONTROL PANEL ____________ 20 USE OF THE COOKING HOB____________________________________________ 21 CLEANING AND MAINTENANCE _________________________________________ 26 SOMETHING WRONG?________________________________________________ 26 INSTALLATION _______________________________________________________ 27 INSTRUCTIONS FOR THE USER: these contain user advice, description of the commands and the correct procedures for cleaning and maintenance of the appliance. INSTRUCTIONS FOR THE INSTALLER: these are intended for the qualified technician who must install the appliance, set it functioning and carry out an inspection test. 17 Instructions for use 1. INSTRUCTIONS FOR USE ELECTRICAL CONNECTION: REFER TO THE INSTALLATION INSTRUCTIONS FOR THE SAFETY REGULATIONS FOR ELECTRIC OR GAS APPLIANCES AND VENTILATION FUNCTIONS. IN YOUR OWN INTEREST, AND THAT OF SAFETY, IT IS THE LAW THAT ALL GAS AND ELECTRICAL APPLIANCES BE INSTALLED AND SERVICED BY COMPETENT PERSONS, WHO WILL COMPLY WITH THE RELEVANT STANDARDS AND REGULATIONS. [. . . ] If you do not have a magnet, you can put a small amount of water in the recipient, place it on a cooking zone and start the hotplate. If the power symbol on the display starts to flash, it means that the pan you are using is not suitable for your appliance. The pans used for cooking must have a minimum diameter to guarantee proper functioning. Metal objects such as cutlery or lids must not be left on the hob as they risk being overheated without the user realising it. This printed circle indicates the minimum permissible diameter on that cooking zone. Pans with smaller diameters risk not being detected and therefore not activating the inductor. Pans that are larger than the cooking zones can also be used, but care must be taken that the bottom of the pan does not come into contact with other cooking zone and that it is always centred on the cooking zone perimeter. Use only recipients with a perfectly flat bottom and which are suitable for induction cooking or, if pans of this type are not available, recipients whose bottom is not crowned (concave or convex). Using a pan with an irregular bottom could jeopardise the efficiency of the heating system so that the pan is not detected on the hotplate. YES NO NO 22 Instructions for the user 5. 3 Switching on the cooking zone Press the button for the cooking zone you want to use (for example On the power display, 0 appears. Pressing the keys and for the front right-hand zone). you can set the power from 1 to 9. Once you have set the hotplate's power level, this will not be activated until a pan suitable for induction cooking is placed upon it. See paragraph 5. 2 Cookware" , the power level reaches 15. On the hotplates with keys If after having activating the hotplate, no power value is selected, the hotplate is automatically deactivated. 5. 3. 1 Preselection levels (on some models only) The keys activated. Key Key , present only on some models, allow preset power levels for that hotplate to be : cooking level 7; : cooking level 11; Key : cooking level 15; 5. 3. 2 POWER button (only on some models) The key , present only on some models, permits supplementary power to be activated. to indicate that the POWER function is When it is pressed, the hotplate's power display will show active on that hotplate. If the key is pressed, a power setting of 15 will be set. 5. 3. 3 Switching off the hotplate Any hotplate can be switched off (the figure shows the front right-hand zone) at any time by pressing the ON/OFF key. The set power level will disappear from the display and if the hotplate remains hot even after it has been switched off, a begins to flash. On this regard, please refer to paragraph "5. 3. 5 Residual heat". 5. 3. 4 Automatic hotplate switch-off (on some models only) By means of this function, present on some models only, it is possible to program the switching off of the hotplate after a variable operating time: from 1 to 99 minutes. Select the desired power level at which to use the hotplate; and the cooking duration can be set. Using the keys At the end of the time the hotplate will be deactivated and a buzzer will sound temporarily. To interrupt the signal before time, press any button for the cooking plate used. [. . . ] THE SOCKET MUST BE ACCESSIBLE AFTER THE APPLIANCE IS BUILT IN. IMMEDIATELY AFTER INSTALLATION CARRY OUT A BRIEF INSPECTION TEST OF THE HOB, FOLLOWING THE INSTRUCTIONS. IF THE HOB FAILS TO OPERATE, AFTER CHECKING THAT YOU HAVE CARRIED OUT THE INSTRUCTIONS CORRECTLY, DISCONNECT THE APPLIANCE FROM THE ELECTRICAL MAINS AND CONTACT YOUR NEAREST SERVICE CENTRE. PASS THE POWER SUPPLY CABLE THROUGH THE BACK OF THE UNIT, TAKING CARE THAT IT DOES NOT TOUCH THE BOTTOM CASING OF THE HOB OR THE OVEN (IF ANY) INSTALLED UNDERNEATH IT. [. . . ]