User manual SMEG SE2931ID

[. . . ] Gebrauchs- und Montageanweisung Induktions-Glaskeramik-Kochfeld Instructions for fitting and use Glass ceramic induction hob Instructions de montage et d'utilisation Table de cuisson vitrocéramique à induction Gebruiks- en montage-instructies Keramische inductiekookplaat Istruzioni per uso e montaggio Piano di cottura ad induzione in vetroceramica Instrucciones para el uso y montaje Encimera vitrocerámica per inducción Instruções de uso e de montagem Placa de cozinhar de indução em vitrocerâmica 225985 N91 GB Disposing of the packaging Please dispose of the packaging that came with your appliance in an environmentally friendly way. Recycling in this way saves on resources and cuts down on waste. For your information. . . Please read this manual carefully before using your appliance. It contains important safety advice; it explains how to use and look after your appliance so that it will provide you with many years of reliable service. Should a fault arise, please first consult chapter "What to do if trouble occurs?". [. . . ] The power setting displays will indicate an L for child lock, the controls will be inaccessible and the hob will switch off. Then immediately press the plus button simultaneously. and the minus button in order to deactivate the childproof De-activating the childproof lock for one cooking procedure only This is only possible if the childproof lock has been switched on in accordance with items 1-3. · Then immediately press the plus button and the minus button simultaneously. Now the user will be able to switch on a cooking zone (to do so, select a cooking zone and set the power level). When the hob is switched off the childproof lock will be activated again (switched on). In the event of a power cut the childproof lock will be cancelled, i. e. deactivated. 24 Operation Automatic switch-off (timer) GB The automatic switch-off device is used to automatically switch off any cooking zone after a stipulated period of time. Cooking times ranging from 1 minute to 99 minutes can be set. Switch on one or more cooking zones and set the required power settings. The standby dot of the timer will light up. Press the button again until the timer indicator lamp of the required cooking zone blinks. Timer indicator lamps can only blink if the cooking zones have already been switched on (power setting higher than 0). Then immediately use the minus button or the plus button to set the cooking time at between 1 and 99 minutes. With the plus button the display will commence at 01, and with the minus button it will commence at 30. The setting will be reset if the plus and minus buttons are pressed simultaneously (00). In order to program the automatic-switch-off device for another cooking zone, press the timer selection button repeatedly until the timer indicator lamp for the required cooking zone blinks. Then use the minus button or the plus button to set the required time. The cooking zone will be switched off when the time has lapsed. A signal will sound for a while and can be switched off by pressing any button (except for the on/off button). Timer indicator lamp Stand-by dot for the automatic switch-off device Minute minder lamp Please note · In order to check the time that has lapsed (automatic-switch-off device) press the timer selection button repeatedly until the timer indicator lamp for the required cooking zone blinks. The setting displayed can be read and changed. · Terminating the function of the timer: select the respective cooking zone (timer indicator lamp blinks) and press the plus and minus buttons once at the same time. Minute minder (egg timer) · Press the timer selection button until the minute minder lamp blinks with this button. [. . . ] No mains cable present in the factory · To connect the appliance, unscrew the switchbox cover on the underside of the appliance to access the terminal block. After connecting the appliance, replace the cover and secure the connection cable with the strain relief clamp. · The connection cable must be at least H05 RR-F. · If the excess cable of this appliance is damaged, it has to be replaced by the manufacturer, the Customer Service of the manufacturer or by another qualified person to avoid danger. [. . . ]