User manual SMEG SED908EB

[. . . ] When making the electrical connections, check that the current socket has a ground connection and that the voltage values correspond to those indicated on the data plate inside the appliance itself. In case your appliance is not furnished with a non separating flexible cable and has no plug, or has not got any other device ensuring omnipolar disconnection from the electricity main, with a contact opening distance of at least 3 mm, such separating device ensuring disconnection from the main must be included in the fixed installation. Always switch off the electricity supply before carrying out any cleaning or servicing operations on the appliance. DESCRIPTION --------------------------------------------------This appliance consists of a telescopic structure, a hood and telescopic flue which covers the telescopic structure itself. [. . . ] € Prepare the air venting hole if your appliance is to be installed in the Ducting version. Once having established the desired position, assemble the equipment in the following way: Prepare the air disposal pipe and the electric power cable. Insert the upper telescopic flue into the structure. Fix the upper telescopic flue to the plate of the structure anchored to the ceiling by means of the two screws A (Fig. Push in the lower telescopic flue right up to the top, partially tightening screws B (Fig. 6) and temporarily resting the pipe on these. During this operation, check that the fixing holes C (Fig. 6) of the lower telescopic flue point downwards. Fix the hood to the lower plate of the telescopic structure using the four supplied nuts and relative washers (Fig. If the model you bought requires it you have to insert the two plastic spacing bars (Fig. 6D) into the side pitches of the telescopic structure. 8) to the hood through the lower part of opening B (Fig. Fix the previously installed air disposal flue to the union flange on the hood and make the relative electrical connections. mAINTENANCE --------------------------------------------------Thorough servicing guarantees correct and long-lasting operation. Particular care must be paid to the antigrease filters which must be periodically cleaned in relation to use (at least once every two months). Remove the anti-grease filters and wash them either by hand or in the dishwasher using neutral detergent. Use lukewarm water and neutral detergent to clean painted appliances. never use products containing abrasives. [. . . ] If the model you bought requires it you have to insert the two plastic spacing bars (Fig. 6D) into the side pitches of the telescopic structure. 8) to the hood through the lower part of opening B (Fig. Fix the previously installed air disposal flue to the union flange on the hood and make the relative electrical connections. [. . . ]