User manual SMEG SFP105N

[. . . ] Contents 1 Instructions 1. 1 1. 2 1. 3 1. 4 1. 5 1. 6 1. 7 2. 1 2. 2 2. 3 2. 4 How to read the user manual This user manual Appliance purpose General safety instructions Manufacturer liability Identification plate Disposal General Description Control panel Other parts Available accessories Instructions First use Using the accessories Using the oven Cooking advice Display 30 30 30 30 30 31 31 31 2 Description 32 32 32 33 33 3 Use 3. 1 3. 2 3. 3 3. 4 3. 5 3. 6 35 35 35 35 36 38 39 4 Cleaning and maintenance 4. 1 Instructions 4. 2 Cleaning the surfaces 4. 3 Ordinary daily cleaning 4. 4 Food stains or residues 4. 5 Removing the door 4. 6 Cleaning the door glazing 4. 7 Removing the internal glass panels 4. 8 Cleaning the inside of the oven 4. 9 Pyrolysis: automatic oven cleaning 4. 10 Extraordinary maintenance 45 45 45 45 45 45 46 46 47 48 50 5 Installation 5. 1 Electrical connection 5. 2 Cable replacement 5. 3 Positioning 52 52 52 53 We advise you to read this manual carefully, which contains all the instructions for maintaining the appliance's aesthetic and functional qualities. For further information on the product: www. smeg. com 29 EN Instructions 1 Instructions 1. 1 How to read the user manual This user manual uses the following reading conventions: Instructions General information on this user manual, on safety and final disposal. Description Description of the appliance and its accessories. Use Information on the use of the appliance and its accessories, cooking advice. [. . . ] A few seconds after the required duration is set, the indicator light stops flashing. Turn the knob right or left to set the cooking end time. After a few seconds the and indicator lights stop flashing. The appliance waits for the set start time. At the end of the cooking time STOP appears on the display and a buzzer will During operation, it is possible to modify timed cooking duration: 1. When the and indicator lights are steady and the appliance waits for the cooking to start, press the temperature knob. The indicator light will start flashing. Turn the temperature knob right or left to alter the preset cooking time. The indicator light switches off and the indicator light starts flashing. Turn the temperature knob right or left to delay the cooking end time. 41 EN Use 5. After a few seconds the and indicator lights stop flashing and the automatic cooking restarts its operation with the new settings. Timer This function only activates the buzzer, without stopping cooking. The display shows and the indicator light flashes. Secondary menu The appliance also has a concealed secondary menu allowing the user to: · Activate or deactivate the Child Lock. · Activate or deactivate Showroom mode (which disables all the heating elements so that only the control panel works). · Activate or deactivate Low Power mode. With the appliance in Stand-By status 1. Press and hold the temperature knob for at least 5 seconds. Turn the temperature knob right or left to change the setting status (ON/OFF). Press the temperature knob to move to the next mode. Child Lock mode: This mode allows the appliance to automatically lock the controls after one minute of normal operation without any intervention from the user. 2. Turn the knob right or left to set the duration (from 1 minute to 4 hours). [. . . ] It is a normal operation of the appliance, useful when cooking foods in order to avoid excessive heat escaping. When the door is closed, the oven will return to normal operation. If the problem has not been resolved or in the case of other types of fault, contact your local technical support centre. 51 EN Installation 5 Installation 5. 1 Electrical connection Power voltage Danger of electrocution · Have the electrical connection performed by authorised technical personnel. · The appliance must be connected to earth in compliance with electrical system safety standards. [. . . ]