User manual SMEG SI800AO

[. . . ] PRECAUTIONS FOR USE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 DISPOSAL INSTRUCTIONS - OUR ENVIRONMENT POLICY . . . . . . . . . . . 35 SAFETY PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 GET TO KNOW YOUR OVEN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] 6. 2. 5 Stopping the buzzer To switch off the buzzer, turn knob A clockwise until pointer B is aligned with . 42 Instructions for the User 6. 3 Analogue programmer Allows selection of manual cooking or the minute minder function, or setting of the cooking start and end times. 6. 3. 1 Setting the time To set the correct time, press or pull the knob A (depending on the model) and turn it anticlockwise. 6. 3. 2 Semiautomatic cooking This function only switches the oven off automatically at the end of the cooking time (maximum programmable time 3 hours and 30 minutes). 1 Turning the outer knob B clockwise will start to move the inner disc; the red hand C must be on the end of cooking time required. 2 Turning the outer knob B anticlockwise will regulate the size of the red zone D which must correspond to the current time on the clock (cooking start). At the end of the set time, the oven will switch off automatically, an 0 will appear in the window E while a buzzer will also sound: to stop it, turn the outer knob B clockwise until the symbol appears in window E. 43 Instructions for the User 6. 3. 3 Automatic cooking This setting allows the oven to be switched on and off in fully automatic mode (maximum programmable time 3 hours and 30 minutes). 3 Turning the outer knob B clockwise will start to move the inner disc; the red hand C must be on the end of cooking time required. 4 Turning the outer knob B anticlockwise will regulate the size of the red zone D corresponding to the cooking duration; the point where the knob B is released corresponds to the cooking start time. At the end of the set time, the oven will switch off automatically, an 0 will appear in the window E while a buzzer will also sound: to stop it, turn the outer knob B clockwise until the symbol appears in window E. 6. 3. 4 MInute minder The minute minder can be used on its own or together with the programmer. To set it, turn the inner knob A clockwise until the hand is in line with the time required (up to 55 minutes). After the set time, the buzzer starts to sound: to stop it, turn the inner knob A anticlockwise until the hand is on the symbol. The buzzer does not stop operation of the oven. 6. 3. 5 Manual cooking To use the oven in manual mode without time limits, bring the into window E by turning the outer knob B. symbol 44 Instructions for the User 7. ACCESSORIES AVAILABLE The oven is fitted with 4 runners for placing trays and shelves at different heights. Shelf: useful to support pans containing the food for cooking. Tray grid: for placing on top of a tray for cooking foods which may drip. Oven tray: useful for collecting fat from foods placed on the grid above. Pastry tray: useful for cooking cakes, pizza and confectionery. Roof liner: remove it to simplify cleaning inside the oven. Rotisserie shelf (models with static oven only): for fitting onto the oven runners before the rotisserie rod is used. Rotisserie rod (models with static oven only): useful for cooking chicken, sausages and all foods which require uniform cooking over their entire surface. Chromium-plated gripper: useful for removing hot shelves and trays. Not all accessories are provided on some models. Optional accessories Original accessories can be ordered through our Authorised Service Centres. 47 Instructions for the User 9. [. . . ] Once the door has been removed, lift the tangs at the corners as shown in the figure. 58 Instructions for the Installer 12. INSTALLING THE APPLIANCE 12. 1 Electrical connection The nameplate with the technical data, serial number and mark is in a visible position on the oven door frame. The appliance must be connected to earth in compliance with electrical system safety regulations. If a permanent connection is used, the appliance's power supply line must be fitted with an omnipolar breaking device with contact gap of at least 3 mm, located in an easily accessible position close to the appliance itself. If a socket and plug connection is used, check that they are of the same type. [. . . ]