User manual SMEG WHT912EIT-1

[. . . ] WHT 912EIT-1 Washing Machine User’s Manual Document Number 2820525014_EN/ 24-08-15. (15:30) 1 General safety instructions This section includes security instructions which may help prevent the injuries and material damage risks. All kinds of warranties shall be invalid if these instructions are not observed. 1. 1 Life and property safety u Never place the product on a carpet-covered floor. Electrical parts will get overheated since air cannot circulate from under the device. This will cause problems with your product. [. . . ] 40 / EN Washing Machine / User’s Manual • Scarico + Centrifuga (Drain + Spin) Use to drain the water in the machine. 4. 3. 4 Temperature selection Whenever a new programme is selected, the recommended temperature for the selected programme appears on the temperature indicator. To decrease the temperature, press the Temperature Adjustment button. Temperature will decrease gradually. 4. 3. 5 Spin speed selection C If the programme has not reached the heating step, you can change the temperature without switching the machine to Pause mode. Whenever a new programme is selected, the recommended spin speed of the selected programme is displayed on the spin speed indicator. To decrease the spin speed, press the Spin Speed Adjustment button. Then, depending on the model of the product, "Rinse Hold" and "No Spin" options appear on the display. See "Auxiliary function selection" section for explanations of these options. Rinse Hold (Stop in ammollu) If you are not going to unload your clothes immediately after the programme completes, you can use rinse hold function to keep your laundry in the final rinsing water in order to prevent them from getting wrinkled when there is no water in the machine. Press Start / Pause button after this process if you want to drain the water without spinning your laundry. Programme will resume and complete after draining the water. If you want to spin the laundry held in water, adjust the Spin Speed and press Start / Pause button. Water is drained, laundry is spun and the programme is completed. C If the programme has not reached the spinning step, you can change the speed without switching the machine to Pause mode. Indicative values for Synthetics programmes (EN) Programme Duration (min) * Water Consumption (l) Remaining Moisture Content (%) ** Remaining Moisture Content (%) ** Energy Consumption (kWh) Load (kg) ≤ 1000 rpm 45 45 > 1000 rpm 40 40 Synthetics 60 Synthetics 40 4 4 65 65 1. 25 0. 70 105l /135l 105l /135l * You can see the washing time of the programme you have selected on the display of the machine. It is normal that small differences may occur between the time shown on the display and the real washing time. ** Remaining moisture content values may differ according to the selected spin speed. Washing Machine / User’s Manual 41 / EN 4. 3. 6 Programme and consumption table EN 2 Energy Consumption (kWh) Water Consumption (l) Risciacquo Aggiuntivo Max. Speed*** Programme (°C) Prelavaggio Selectable temperature range °C Cotone Eco Cotone Mix Sintetici Camicie Lana Lavaggio a Mano Rapido 14’ Delicati 20° Capi Scuri Lingerie Sport Piumoni Antiallergico Tende • * ** *** **** - 60** 60** 40** 90 60 40 40 60 40 60 40 30 30 20 40 30 40 40 90 40 9 5 5 9 9 9 4 4 4 4 2 1 2 4 4 1 4 9 2 53 45 45 77 77 77 63 65 65 65 46 40 32 45 60 52 66 65 92 80 1. 12 0. 84 0. 86 2. 30 1. 60 0. 80 0. 85 1. 25 0. 70 1. 20 0. 28 0. 25 0. 10 0. 15 0. 60 0. 30 0. 55 0. 90 2. 50 0. 60 1200 1200 1200 1200 1200 1200 1000 1200 1200 800 1200 1200 1200 1200 1000 1000 1000 1000 1200 800 Rapido • • • • • • • • • • • • • • • • • • • • • • • * * • • • • * • * * Cold-60 Cold-60 Cold-60 Cold-90 Cold-90 Cold-90 Cold-40 Cold-60 Cold-60 Cold-60 Cold-40 Cold-30 Cold-30 20 Cold-40 Cold-30 Cold-40 Cold-60 30 - 90 Cold-40 : Selectable. : Energy Label programme (EN 60456 Ed. 3) : If maximum spin speed of the machine is lower then this value, you can only select up to the maximum spin speed. : Program will detect the type and amount of the laundry which you put into the machine and adjust the water consumption, energy consumption and program duration automatically. : See the programme description for maximum load. ** “Cotton eco 40°C and Cotton eco 60°C are standard programmes. ” These programmes are known as ‘40°C cotton standard programme’ and ‘60°C cotton standard programme’ and indicated with the  symbols on the panel. The auxiliary functions in the table may vary according to the model of your machine. Water and power consumption may vary subject to the changes in water pressure, water hardness and temperature, ambient temperature, type and amount of laundry, selection of auxiliary functions and spin speed, and changes in electric voltage. You can see the washing time of the programme you have selected on the display of the machine. It is normal that small differences may occur between the time shown on the display and the real washing time. “Selection patterns for auxiliary functions can be changed by the manufacturer company. [. . . ] • There may be problem in the valves or in the detergent dispenser. • Mix 1 tablespoonful softener and ½ l water and pour into the main wash compartment of the detergent drawer. • Put detergent into the machine suitable for the programmes and maximum loads indicated in the “Programme and consumption table”. When you use additional chemicals (stain removers, bleachs and etc), reduce the amount of detergent. [. . . ]