User manual SMEG WI390EB

[. . . ] - If in doubt, have the appliance connected by a technician. - Lay hoses and cables in such a way that there is no risk of stumbling. Installation area - Stability is important to prevent the machine from wandering!- The installation area must be firm and level. - Soft floors/floor coverings are not suitable. Removing transportation protection devices - Before using the appliance for the first time, always remove and retain all 4 transportation protection devices. [. . . ] - Inform your customer service! Turn off tap Information on Aqua Stop -> Installation instructions -> Page 7. F F Spin speed The spin speed or ) (without final spin) can be set before and while the selected programme is running. The maximum selectable spin speed depends on the model and the set programme. Effects dependent on the programme progress. Additional functions see also programme overview + (Select stain) Extend the washing time for a more intensive washing of heavily soiled items. $ (Less Ironing) Special spin sequence with subsequent fluffing. Gentle final spin - residual moisture in the washing increased slightly. (Extra Rinse) Additional rinse cycle, extended washing time. For areas with very soft water or for further improvement of the rinsing result. Before washing for the first time, Do not put any washing in the washing machine!Turn on the tap, fill approx. 1 litre of water and then pour ½ measuring cup of detergent into dispenser II. Set the Easy Care 60 °C programme and select Start/Stop. At the end of the programme set the programme selector to Off. Insert mains plug With dry hands only!Do not reach into the drum if it is still rotating. Do not open the washing machine door if water can be seen through the glass. - Set the programme selector to Off and disconnect the mains plug. - Drain the detergent solution -> Page 10. - Pull the emergency release with a tool and release. The washing machine door can then be opened. . . . or terminate Programme selector for switching the machine on and off and for selecting the programme. 1 - 24h Finish in Status displays Q K B -0Programme ends in . . . Programme progress displays: Washing, Rinse, Spin, End All buttons are sensitive and a gentle tap is adequate!If the option button is touched for longer, the setting options run automatically! Washing Programmes with high temperature: - Cool washing: Select Rapid 15'. Programmes at lower temperature: - Select ( (Spin) or - (Empty) . [. . . ] - Transportation safety devices removed?Remove transportation protection devices > Installation instructions, Page 3. - If the fault occurs repeatedly, call customer service. Consumption values www. smeg. com Programme Cottons/Coloureds 40 °C* Cottons/Coloureds 60 °C* Coloureds eco 60 °C* Cottons/Coloureds 90 °C Easy Care 40 °C* Easy Care 40 °C* (also suitable as Short programme) Delicate/Silk Å Wool Å Wool 30 °C + + + + + Additonal function (Select stain) (Select stain) (Select stain) (Select stain) (Select stain) Load 8, 0 kg 8, 0 kg 8, 0 kg 8, 0 kg 3, 5 kg 3, 5 kg 2, 0 kg 2, 0 kg 2, 0 kg Current** 0, 94 kWh 1, 65 kWh 1, 20 kWh 2, 73 kWh 0, 55 kWh 0, 54 kWh 0, 03 kWh 0, 08 kWh 0, 20 kWh Water** 80 l 80 l 56 l 97 l 53 l 53 l 39 l 40 l 40 l Programme duration** 2:12 h 2:12 h 3:25 h 2:12 h 1:12 h 0:45 h 0:40 h 0:36 h 0:36 h Drainage hose at the siphon Set the programme selector to Off, disconnect the mains plug. Loosen the hose clamp, carefully remove the drainage hose (residual water). [. . . ]