User manual SNAKEBYTE MEDIA REMOTE XBOX 360 QUICK START GUIDE

[. . . ] Quickstart Guide Xbox 360TM Media Remote Control SET UP YOUR XBOX 360TM MEDIA REMOTE CONTROL Insert Batteries 1. Insert two new AAA batteries as shown in the battery compartment. [. . . ] When the green LED quickly flashes twice and then turns off, the key is successfully set up the same function of the key on your TV remote. Repeat steps 2 to 4 to set the other universal keys. 5. After all the universal keys are successfully set up, the remote stays at the mode for working on your TV. You can control your TV now or press the TV key to change the mode for working on your Xbox 360TM game console. You can set up any key of an IR remote to the universal keys on the remote. The universal keys can only learn the keys of an IR remote. The universal keys can only memorize the function the last time learnt. When you use the Media Remote Control first time, the universal keys have no function in the TV mode. You need to set up each of the keys by doing the above 4 steps. Guarantee & Troubleshooting If you encounter problems, try the possible solutions provided below. Video or Sound Is Poor or Not Working Make sure your AV cable is properly connected. Buttons Don't Work Make sure the batteries are still fresh by testing the remote with new batteries. [. . . ] Make sure that you're using the remote within 10 feet of the infrared sensor. Close drapes and blinds during daylight hours to minimize ambient infrared. [. . . ]