User manual SNAKEBYTE REMOTE XS CONTROLLER

[. . . ] The order in which controllers are synced represents the player numbers in multi-player games. How to sync in One Time Mode: Press "HOME" on the controller that is synchronised permanently with the console. Select "WII REMOTE SETTINGS" in the upcoming menu, followed by "RECONNECT" Press "1" and "2" simultaneously on the Remote XS Controller which you want to sync with the Wii console in One Time Mode Repeat the above steps for each controller you would like to temporarily sync with your Wii console. The order in which controllers are synced represents the player numbers in multi-player games. [. . . ] Connecting the Wireless Motion XS Controller Equip your Wireless Motion XS with batteries Connect the Wireless Motion XS receiver with the Extension Connector Port on the Wii Controller Once console and Wii Remote are activated press the Sync button on the Wireless Motion XS to establish a wireless connection between the Motion XS and the receiver. a proper connection is indicated by constantly lighting LEDs on the receiver and the Wireless Motion XS Controller. Proper use of the Wireless Motion XS Controller The Wireless Motion XS can not be used on its own, without the Wii Remote or snakebyte Remote XS. It adds another dimension to Wii gameplay, but only complements the main controller. When using the motion sensing features of the Wii Remote and the Wireless Motion XS please make sure not to move too excessively. Be sure not to hurt people and/or damage objects around you. Make sure not to lose the Wii Controller and Wireless Motion XS while playing by always wearing the wrist strap and holding both items tightly. There is no need to deactivate your Wireless Motion XS by pressing the Sync button or removing the batteries from the battery compartment. If the Motion XS is not used for some minutes it will automatically enter sleep mode. You just need to press any button to reactivate the Wireless Motion XS. In certain cases you might have to carry out the synchronisation process again (e. Further more you should make sure that there are no interferences between the Remote XS Controller's wireless Bluetooth connection and other wireless devices operating in the 2. Ideally no devices operating in the same room as the Wii console and Remote XS controller should emit radio waves that could potentially interfere with the Remote XS' signal transfer. Use the Remote XS Controller from the optimal operating distance of three metres and make sure there are no objects between controller and sensor bar that could influence the signal transfer. Avoid insolation and other intense light sources behind the TV set and sensor bar in order to maintain the optimal detection of the sensor bar's infrared LED by the Remote XS Controller's camera. Other sources of infrared light such as candles also cause incorrect detection, avoid placing such light sources within Further more pay attention to the sensor bar's correct sensitivity setting in your Wii console's option menu. In case the problem still persists, please restart your Wii console and sync your Remote XS Controller newly. Make sure the batteries in use are not too weak and replace them with fresh ones if required. In many cases pointing the Remote XS Controller off-screen for a few seconds solves the problem. Turn off your Wii console and turn it on again immediately. Make sure your main controller is synced with the console and the Motion XS Controller's receiver is firmly attached to the controller's Extension Port. My game seems to receive input signals although I do not even touch the Wireless Motion XS Controller. [. . . ] We really appreciate your trust in our fine products. These controllers were thoroughly produced under constant quality inspection and according to international quality and safety standards. If you follow this manual, set up, operation, and basic maintenance of the XS Controllers is cakewalk. In case you encounter any problems exceeding this manual please contact your dealer or our friendly customer support under support@snakebyte-europe. [. . . ]