User manual SNAKEBYTE WII PREMIUM MOTION XS CONTROLLER

[. . . ] When using the motion sensing features of the Wii Remote and the Wireless Motion XS please make sure not to move too excessively. Be sure not to hurt people and/or damage objects around you. Make sure not to lose the Wii Controller and Wireless Motion XS while playing by always wearing the wrist strap and holding both items tightly. [. . . ] My game seems to receive input signals although I do not even touch the Wireless Motion XS. Repeat the synchronisation process by pressing the Sync button on the Wireless Motion XS, this time making sure the analogue thumbstick of the Wireless Motion XS remains in its neutral position during syncing. You may also reset the thumbstick by making sure it rests in its neutral position and simultaneously pushing and holding A, B, Plus & Minus on the Wii Controller it is connected with. Keep the buttons pushed for at least three seconds. Unfortunately compatibility with 3rd party accessories can not be guaranteed. This especially refers to light guns, sports packs and the like. Further more incompatibilities with Nintendo accessories may also occur due to differences in regard to button layout and/or shape. You should keep in mind that this product is not a copy of Nintendo's Wii Nunchuk. We issue a guarantee of two years after purchase of the snakebyte Wireless Motion XS. Therefore, please preserve your invoice, e. In order not to invalidate the warranty and to protect your health never try to repair and/or disassemble the device. There are no user serviceable parts inside anyway. Amongst others the following defects can not be asserted: basically all defects resulting from violation of this manual defects resulting from improper use or cleaning mechanical and optical flaws (e. Scratches, broken casing caused by brute force or carelessness) defects caused by force majeure any defects caused by components that are not themselves parts of or the Controller itself. 4 GHz wireless technology, virtually lag-free Extends your Remote XS Controller/Wii Remote with two additional buttons, a full analogue thumbstick and an extra motion sensor enhancing the gameplay Extra small wireless receiver plugs into the main controller and allows for untroubled gameplay No interference: up to four Wireless Motion XS Controllers can be used simultaneously in multiplayer matches 100% compatible with all games that support the original Nunchuk External On/Off and synchronisation buttons Two rechargeable Ni-MH batteries as well as USB charging cable included in delivery, the controller can be charged using any USB port Technical data is subject to change without notice. Before using your snakebyte Wireless Motion XS for Wii please read this manual thoroughly. [. . . ] Make sure your Wii Controller is synced to the console and the Wireless Motion XS receiver is firmly We really appreciate your trust in our fine products. This controller was thoroughly produced under constant quality inspection and according to international quality and safety standards. If you follow this manual, set up, operation, and basic maintenance of the Wireless Motion XS is cakewalk. [. . . ]