User manual SNAKEBYTE WII REMOTE XS CONTROLLER

[. . . ] Please be aware of the fact that the temporary synchronisation will be erased once the Wii is turned off and that the Standard Mode settings of the respective Remote XS Controller will then be reactivated. For further information regarding synchronisation please refer to your Wii console manual. Please also pay attention to the appropriate disposal of drained batteries to protect our valuable environment. How to install batteries in your Remote XS Controller Remove the battery cover Insert the batteries into the battery compartment, ensuring the correct placement and polarisation Close the battery cover Proper use of the Remote XS Controller Please fasten one of the wrist straps onto the fixture in the Remote XS Controller's base and always wear it with a tightened strap lock to avoid accidental slipping. [. . . ] Avoid insolation and other intense light sources behind the TV set and sensor bar in order to maintain the optimal detection of the sensor bar's infrared LED by the Remote XS Controller's camera. Other sources of infrared light such as candles also cause incorrect detection, avoid placing such light sources within the Remote XS Controller's camera range. Further more pay attention to the sensor bar's correct sensitivity setting in your Wii console's option menu. In case the problem still persists, please restart your Wii console and sync your Remote XS Controller newly. Make sure the batteries in use are not too weak and replace them with fresh ones if required. In many cases pointing the Remote XS Controller off-screen for a few seconds solves the problem. My Remote XS Controller is incompatible with certain accessories Unfortunately compatibility with 3rd party accessories can not be guaranteed. This especially refers to charging docks and their respective battery packs. Further more incompatibilities with Nintendo accessories may also occur due to slight differences in regard to button layout and/or shape, or the slightly different shape of the Remote XS Controller's housing. You should keep in mind that this product is not a copy of Nintendo's Wii Remote. If you still encounter problems that can not be solved by reading the section , , troubleshooting", please contact us: Sunflex Europe GmbH Obere Oese 2­4 58675 Hemer Germany support@snakebyte-europe. Before using your snakebyte Remote XS Controller please read this manual thoroughly. If you comply with all instructions and tips, using the Remote XS Controller is easy and comfortable. Please retain this manual for future reference. If you don't want to lose your warranty, please refrain from disassembling the Remote XS Controller ­ there are no user serviceable parts inside anyway. inappropriate handling does invalidate the warranty and leads to malfunctions of the device. Keep your Remote XS Controller away from liquids and liquid containers such as vases, bottles, hot baths, jacuzzi tubs, etc. Any damage occurring from liquids invalidates the warranty. Included in delivery Within the package of the snakebyte Remote XS Controller you should find the following items: 1x Remote XS Controller 2x Security Wrist Strap 1x this manual If any part is missing or obviously broken please contact your dealer immediately. If there are more than the mentioned items included ­ congratulations!Synchronisation of the Remote XS Controller In order to use the snakebyte Remote XS Controller with your Nintendo Wii it needs to be synchronised with the console. There are two different ways to synchronise the Remote XS Controller with the console, a permanent (Standard) and a temporary (One Time) mode. [. . . ] Turn off your Wii console, disconnect the AC adaptor for ten seconds and restart your Wii console. Make sure your Remote XS Controller is either synced in permanent (STANDARD) or temporary (ONE TIME) mode to the console. Your Remote XS Controller needs two AA batteries to operate. it is highly recommended to use quality Alkaline batteries for maximum operating time. [. . . ]