User manual SOLAC AR6290

[. . . ] ⷠMake sure you plug the appliance into a socket that has a suitable earth connection. Do not allow children or other persons whose physical, sensorial or mental state makes it impossible for them to use this product safely to use it without assistance or supervision. This rice cooker is fitted with a thermal safety device. [. . . ] Take it to your nearest RECYCLING POINT or waste collection centre for treatment. You will thus be helping to take care of the environment. You can use the dispensing vessel (14) to calculate the quantity. 2 Add water , depending on the type of rice used and the amount of cooking required. If using the dispensing vessel, the marks inside the container indicate the quantity of water that must be added. For example: if you add 5 glasses of rice pour the water in until it reaches the mark corresponding to 5 on the inside of the container (2). 1) 3 Put the container (2) inside the casing and move it gently, making sure it touches the heating plate (3). 4 Plug the connection cord (7) into the socket (6) and connect the other end to the mains. Then press the switch by selecting the cooking position, when the red pilot lamp (9) will light up, indicating that the rice is being cooked (fig. 5 Once the rice is cooked, after approximately 20 minutes, the switch (11) will automatically move to the heating function, when the orange pilot light (10) will go on. 6 Leave the rice with the lid (1) on for 10 minutes before serving. 7 While the heating function is selected , the rice temperature will be maintained at between approximately 60ºC and 70ºC. 8 Unplug the connection cord when the rice no longer needs to be kept warm, and in all cases before removing the container (2). sTEAMING 1 Pour water inside the container (2) up to the 5 mark. [. . . ] There must be no external particles between the container (2) and heating plate (3) as otherwise the rice cooker operation could be affected and the components might even be burned. Use a dry cloth to clean the inside of the casing (5), once the element is dry. Clean the container using water and a non-corrosive detergent for best results. [. . . ]