User manual SOLAC CF4005

[. . . ] Read these instructions before using the coffee maker. â· Do not switch the coffee machine on without making sure that the voltage stated on the specifications plate matches that in your home. â· Make sure you plug the appliance into a socket that has a suitable earth connection. [. . . ] â· Place the filter holder (3) in the coffee maker, checking that it fits correctly with the tab on the right (fig. 1), then place the permanent filter (4) or a paper filter and add ground coffee to the filter (4). NOTE: You should preheat the thermos jug before starting to make coffee. To do so, wash the inside with hot water. This will keep the coffee hot for longer. In order for the coffee to stay hot for longer, we recommend making at least half a jug of coffee each time. â· To remove the lid from the jug, turn it to the right until the arrow on the jug matches the OPEN marking (fig. To place the lid on the jug, align the arrow on the lid with the OPEN marking and turn it to the right until it matches the CLOSE marking (fig. Make sure the lid of the jug is correctly in place and place the jug (6) on the hotplate (8) as shown in figure 4. â· Plug the coffee maker into the mains. You can remove the jug during the coffee-dripping process, since the automatic antidrip system will prevent it from dripping. Be careful if you remove the jug for too long, since the water in the filter holder can overflow. â· If you find that the coffee overflowed from the coffee holder at the end of the process, use a smaller amount of coffee the next time. â· You do not need to remove the thermos jug lid to serve the coffee, simply press down on the tab on the lid (fig. [. . . ] â· Descale the coffee maker approximately once every 6 months, depending on how often you use it and the hardness of the water. To remove incrusted scale, we recommend cleaning out all the pipes that carry water. Then, let the coffee maker work twice with nothing but water, to clean it out completely. [. . . ]