User manual SOLAC HU1050

[. . . ] Remove all elements from the inside or outside of the appliance used for protection during transport or for sales promotions, such as paper or plastic bags, plastic sheets, cardboard and stickers. Do not plug in the appliance without first checking that your home mains voltage matches that stated on the specifications plate. Do not cover the appliance while in use. Do not place the mist outlet near any furniture, the wall, a TV or any other appliance that can be damaged by damp. [. . . ] : When you want to dispose of the appliance, NEVER throw it in the bin. Take it to your nearest RECYCLING POINT or waste collection centre for treatment. You will thus be helping to take care of the environment. Water tank Mist outlet Ioniser function on/off switch Pilot light Mist on/off switch Ionised air outlet Pilot light showing that the ioniser function is active Water level float Transducer Internal water tank Brush 1 Separate the water tank (1) from the base, turn it over and remove the cap from the bottom, turning it anticlockwise. Fill with cold water; do not fill completely. 2 Replace the plug, aligning the notches on the tank with the grooves on the cap, and turn it clockwise. 3 Turn the tank over and place it on its base making sure it fits perfectly. 4 When placing the water tank (1) back on the base, a part of the water it contains enters the space between the tank and the body (10); this is part of the normal operation of the appliance and does not entail any risk. Use the on / off switch (5) to select the desired flow of mist. The humidifier starts working and the pilot light (4) comes on. 6 When you want to deactivate the mist function, use the on/off switch (5) and return it to the original position. Before running dry, thanks to its water level float (8). The ioniser function can be selected on its own or simultaneously with If the mist function is not required, the product can still be used as an air purifier. To use the ioniser function, press the on / off switch (3) Fig. The pilot light (7) remains on while the ioniser function is active. To deactivate this function, press the selector again (3) and the pilot light (7) goes out. Before any cleaning operation, switch the appliance off and unplug it. 1 There may be some scale deposits in the transducer, particularly in areas with hard water. Overcome this drawback by cleaning the transducer with vinegar at least once a week, as follows: a) Moisten a cotton bud with vinegar and wipe the transducer gently, until the scale deposits disappear completely. B) Rub down with a dry cloth and remove remains of moisture. [. . . ] Which can more easily reach the lower respiratory tracts. This type of humidifier is therefore suitable for the treatment of symptoms of the common cold and laryngitis. Use is not however recommended for persons with bronchial asthma and allergies. Domestic humidifiers are ideal for obtaining a comfortable humidity environment between 40% and 60%, the range in which the risk of respiratory infection is minimised. [. . . ]