User manual SOLAC HU1060

[. . . ] This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instructions concerning use of the appliance by a person responsible for their safety. Remove all elements from the inside or outside of the appliance used for protection during transport or for sales promotions, such as paper or plastic bags, plastic sheets, cardboard and stickers. Do not plug in the appliance without first checking that your home mains voltage matches that stated on the specifications plate. [. . . ] Do not use the humidifier when barefoot. Do not touch the appliance with wet hands when in operation. When unplugging the appliance, do not pull on the power cord or the appliance. The appliance and its power cable must not be placed under water in any case. : When you want to dispose of the appliance, NEVER throw it in the bin. Take it to your nearest RECYCLING POINT or waste collection centre for treatment. You will thus be helping to take care of the environment. On/off switch Water tank Tank cover Tank handle Steam outlet Base Ion exchange resins Transducer Steam flow regulator Anti-bacteria filter Interior water tank Empty tank indicator light "On" indicator light 1 Remove the water tank (2) from the base (6), turn it over, and remove the cover from the bottom part (3) by turning it counter-clockwise. Add cold tap water without filling it completely, otherwise the ion MAIN COMPONENTS 11 Exchange resins could cause the water to spill over the top when the cover is put on. 2 Put the cover back on by aligning the marks on the tank with the grooves on the cover, and turn it clockwise. 3 Turn the tank back over, and place it on the base while making sure that it is seated correctly. 4 When placing the water tank (2) back on the base, part of the water that it contains will transfer to the space existing between the tank and the body (11). This is how the device works normally and poses no hazard. 5 Plug in the humidifier, and turn it on using the on/off switch (1). 7 If condensation is observed close to the humidifier, select a lower steam flow rate. 8 When you want to stop the steam flow, select the "off" position using the on/off switch (1). 9 If there is insufficient water in the tank , the "empty tank indicator light" (12) will come on , and steam generation will be stopped. In this case, it will be necessary to turn off the humidifier and refill the tank with water before turning the device back on. [. . . ] This type of humidifier is therefore suitable for the treatment of symptoms of the common cold and laryngitis. Use is not however recommended for persons with bronchial asthma and allergies. Domestic humidifiers are ideal for obtaining a comfortable humidity environment between 40% and 60%, the range in which the risk of respiratory infection is minimised. [. . . ]