User manual SOLAC PD7640

[. . . ] Do not use the scales if you have a medical device implanted, such as a pacemaker. Please read the instructions for use carefully before using your bathroom scales. These scales have been designed to weigh people and should not be used for commercial or industrial purposes. If you stop using the scales, do not throw them in the bin. [. . . ] open the battery's compartment and remove the protection. Inside the battery compartment, there is a selector that can be used to choose the measurement unit Move the selector to the desired measurement unit (Kg / Lb/St). If you place the scales on a surface that is too soft, such as a rug, the folds may affect the precision of the weight shown. To start the scales, tap the surface with your foot, or press any key. To start the scales, tap the surface with your foot, or press any key. Stay standing on the scales until your weight appears. Your stabilised weight will blink thrice. Note: if you do not wait before getting on the scales, an error will occur. If this happens, get off the scales, wait for them to turn off and start again. To measure your body fat and water levels, it is necessary for you first to enter some personal data. The scales have a 4-unit memory so that you do not have To perform this operation every time you want to use the scales; every user can record his/her information making it more convenient to use the scales. Press the "+" or "-" buttons until you reach your user number (P1, P2, P3 or P4). It you are using the system for the first time, select a free user number and use the same number the next times you use the scales. - Enter your age with the "+" and "-" buttons. - Enter your height with the "+" and "-" buttons. The data entered will blink before being recorded and they will be stored in the memory for future measurements. The scales will switch off if no buttons are pressed for 10 seconds. To start the scales, tap the surface with your foot, or press any key. Stay standing on the scales until your weight appears. During the weighing process, your feet must be on the metallic lines. After displaying your weight, an "o" will move from left to right. The scales will be carrying out the bio-magnetic impedance analysis, which will calculate your body's fat and water percentage. [. . . ] Do not use abrasive cleaning agents as they may damage the display. Check that you have selected the correct weight measurement unit. Do not get on the scales before the screen displays "0. : When you want to dispose of the appliance, NEVER throw it in the rubbish bin. [. . . ]