User manual SOLAC PV2010

[. . . ] Always unplug the appliance after use and before assembling or removing parts, and performing any maintenance or cleaning operations. also unplug it in the case of a power cut. The appliance must be switched off before plugging or unplugging it into the mains · Never pull the cord or use it to hang up the appliance. Always unplug the appliance by pulling the connection pin, and not the cord. [. . . ] Fill the water tank without exceeding the maximum level, using the water beaker provided (12) and keeping the iron in the vertical position (Fig. ) When filling the tank, make sure that the water does not overflow from the water filler opening. 3 Check whether the garment to be ironed has a label indicating the ironing temperature. ) We recommend you classify the garments according to their required ironing temperature and begin with the garments ironed on the lowest temperature (· , Always make sure the soleplate protector has been removed before starting to , If you have any doubts about the temperature to use for a given garment, perform a Test on a part, which will not be visible, beginning with the lowest temperature settings. ) Completely remove all the elements use for transportation and packaging. N If the appliance is hot, handle it with care and do not touch the metal soleplate. N Never leave the iron in a horizontal position when the soleplate is hot. N Take care with the steam; do not aim it at people, animals or delicate objects. n Always iron on stable , solid and smooth surfaces. ) For very delicate garments, place a cloth between the iron and the delicate garment to Extend the cord completely and plug it into the mains. The temperature pilot light will turn on (11). place the iron in the vertical position. Select the desired operating temperature according to the garment you wish to iron (see "TEMPERATURE SELECTION (fig. After using the iron, set the steam selector (10) to the closed position and the temperature selector (9) to position 0. empty the water tank (see "EMPTYING THE WATER TANK"). Wait until the iron is completely cold and store it in the vertical position in a safe place. ) Before using it for the first time, use the appliance to iron an old cloth or clothing, to Set the temperature selector (9) to the Max position and wait a few minutes for the iron to reach the appropriate temperature (the temperature pilot light will go out). Rotate the steam selector (10) until it is in the completely open position (fig. When the water tank is empty, no more steam will be produced. Do not worry if the iron gives off a little smoke when used for the first time. [. . . ] ) Although the power cord is fitted with a 360º swivel piece, NEVER FORCE this cord when coiling it around the appliance on the first turn. ) It is advisable to carry out the self-cleaning operation about once a month, depending N Be careful when performing this operation, as the water and steam are very hot and Wait for the pilot light to go off (11) indicating that the desired temperature has been reached. Turn the temperature selector (9) to the 0 position and unplug the iron from the mains. To do so, press the steam selector down and turn (fig. [. . . ]