User manual SOLAC TC5310

[. . . ] This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instructions concerning use of the appliance by a person responsible for their safety. Do not modify or repair the appliance in any way. If you detect any anomalies in the cord or any other part of the appliance, do not use it and take it to an authorised service centre. [. . . ] The metal panels of the main body can also get very hot. The bread can ignite, so the bread toaster should not be used in the proximity of or under combustible material, such as curtains. Do not leave the toaster working unattended. When you want to dispose of the appliance, NEVER throw it in the rubbish bin. Take it to your nearest CLEAN POINT or the waste collection centre closest to your home for processing. You will thus be helping to take care of the environment. Before using the toaster for the first time, turn it on without bread for a few minutes. It is normal for it to give off a little smoke at the start. 1 Plug the appliance into the mains, winding the excess cord onto the cord winder at the bottom of the appliance, and use the control (8) to adjust the browning level to your liking (fig. 3 The toasting process ends automatically although, if you want, you can stop it early by pressing the button (9). At the end, the operating control (6) returns to its initial position, the pilot light (9) goes out and the toast appears at the top of the bread slots (fig. ) If the bread gets stuck inside the toaster, unplug the appliance, wait for it to cool down and remove the bread using your hand. ) This function is useful for reheating bread that was already toasted and The browning level is not affected. 1 Insert the previously toasted bread in the slots (3), slide the operating control (6) down and press the button (11) (fig. 2 After a few seconds, the toast is ejected and both pilot lights go out. ) This function allows you to defrost and toast bread in one convenient This function extends the duration of the toasting process by around 30%. 1 Adjust the browning level to your liking using the control (8) and insert the bread in the slots. 3 The defrosting and toasting process is performed automatically in a single step, although, if you want, you can stop it early by pressing the button (9). [. . . ] 2 Remove the crumb tray by pulling it outwards (fig. 9) and clean up any crumbs, bits of bread, etc. 3 Place the tray back in place and ensure it is placed correctly. [. . . ]