User manual SOLAC VT8830

[. . . ] Position the appliance away from objects that could penetrate the grilles. Never immerse the appliance in water or any other liquid. Do not put near a bathtub, shower or swimming pool. [. . . ] Assemble column A (9) and column B (10) passing the power cable through the channel left between them (Fig. Use 4 fixing screws to fix the two parts to the bottom of the fan body (Fig. Next, fit base A and base B together, allowing the power cable to pass through the channel that remains between the 2 bases, and join the two bases together using screws (Fig. Fix the two bases to the central column using the remaining 4 screws (Fig. Finally, guide the power cable through the rail provided on the base for this purpose (Fig. *You can find all the fixing screws in one of the cavities there is in one of the polyspan protections of the appliance. To increase the speed, press the speed selector (6) once to select the medium speed and again if you want high speed. In each case, the relevant pilot light will come on. For this, you will need to press the oscillation button (3). If you press it again, the fan will stop oscillating and remain in the same position. Press the operating mode selector (5) once for the fan to start working in "nature" mode and twice is you want it to work in "night" mode. To return to the "normal" operating mode, press the mode selector a third time and the pilot lights that show the operating mode will go off. Stop timer: It is possible, while the fan is working, to set it to stop automatically after a preset time has passed. The fan can be programmed to stop after 30 minutes and up to 7 hours and 30 minutes, at thirty-minute intervals. Press the stop timer (4) once to set the timer for 30 minutes starting at that time. After this time has passed, the appliance will stop working. Likewise, every time you press the timer (4) will delay the automatic stop of the appliance by 30 minutes. To deactivate the timer function, press the stop timer (4) once more after selecting 7 hours and 30 minutes. [. . . ] Do not use solvents or abrasive cleaners to clean the device, since they could damage its plastic parts. When the appliance is not in use it should be kept in a damp-proof location. Îndeprtai toate elementele care au fost folosite pentru protejarea aparatului pe durata transportului sau pentru promoii de vânzare, cum ar fi pungi de plastic sau de hârtie, foi de plastic, cartoane sau etichete, care sunt prezente atât în interiorul aparatului cât i pe exteriorul acestuia. [. . . ]