User manual SOLAC VT8860

[. . . ] Read these instructions carefully before using the appliance and keep them handy for future reference. Remove all paper or plastic bags, plastic sheets, cardboard and labels inside or outside of the appliance, which have been used to protect the appliance during transport or during the sale promotion. [. . . ] â· Do not use the appliance if it does not work properly or if the power cable is damaged; take it to a Specialised Technical Service Centre. â· Keep the appliance at least 50cm from any other object. â· Before turning on the appliance, check that it is on a stable surface and placed on its base. : When you wish to dispose of the appliance, NEVER throw it in the rubbish bin. Instead, go your nearest CLEAN POINT or waste-collection point, where it will receive subsequent treatment. You will thus be helping to take care of the environment. Power indicator light 8 IMPORTANT Charge the appliance before using it for the first time. (Charging is not Necessary if the appliance is used while connected to the mains) selected while not in use. Recharge the appliance after use and make sure that the 0 position is 2 Maximum charge is obtained after approximately 20-24 hours of charging. Once the appliance is charged, it will run for 3 to 5 hours depending on whether it is used at maximum speed or not (lower autonomy at higher speeds). The autonomy may last longer than 6 hours if you select the slowest speed and the swing function is not used. 1 When using the appliance connected to the mains, select the AC option on the electrical current selector (4) and options 1 or 2 on the speed selector (5) depending on the air flow preferred. [. . . ] When cleaning the blades, unscrew the screw that fixes both grilles and tighten it again after the cleaning operation has been carried out. Do not use solvents or abrasive cleaners to clean the device, since they could damage its plastic parts. [. . . ]