User manual SONOS ZP100

[. . . ] No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including but not limited to photocopying, recording, information retrieval systems, or computer network without the written permission of Sonos, Inc. Windows® XP and Windows® 2000 are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. This product includes technology owned by Microsoft Corporation and under a license from Microsoft Licensing, GP. Use or distribution of such technology outside of this product is prohibited without a license from Microsoft Corporation and/or Microsoft Licensing, GP as applicable. [. . . ] select Edit Name to select a source name for this device. Once setup is complete, simply select Line-In Sources from the Music Library, and press Play Now any time you want to play music from this device. A default (typical) line-in level is automatically assigned when you select a source name. If the volume sounds too low, you can select a higher line level for this device. You may experience clipping at higher volume levels if you set the level too high. When you have line-in music sources attached to a ZonePlayer, line-in encoding determines how the Sonos Digital Music System will encode the data coming in from these sources. for multi-room audio , we recommend using the Compressed setting. For the highest quality sound, you can select Uncompressed encoding, but this selection requires more network bandwidth than compressed audio. for TV or DVD audio , we recommend using the Uncompressed setting. Note: You will notice a delay when a line-in source is in use. When the Uncompressed encoding setting is selected, this delay is significantly reduced. Using the Desktop Controller for Windows, select FilePreferences and then click the Advanced tab. Using the Desktop Controller for Macintosh, select SonosPreferences and then click the Advanced tab. For additional information on connecting audio devices, you can go to our Web site at http://faq. For additional guidance on the use of this feature, please go to the online help system included with your Desktop Controller software. You can easily connect your home theater, stereo, or powered speakers to a ZonePlayer ZP100. indicates the current status of the ZonePlayer. When the ZonePlayer is in normal operation, you can turn the white status indicator light on and off. To mute/unmute this ZonePlayer: Press the Mute button to mute or unmute this ZonePlayer. To mute/unmute all ZonePlayers: Press and hold the Mute button for 3 seconds to mute all ZonePlayers in your household. Flashes white when powering up or connecting to your Sonos Digital Music System. Solid white when powered up and connected to your Sonos Digital Music System (normal operation). [. . . ] Warning: To reduce the risk of fire or electric shock, do not expose this apparatus to Do not expose apparatus to dripping or splashing and do not place objects filled with liquids, Note: Household cleaners or solvents can damage the finish on your ZonePlayers or Controllers. Speakers: Power rating should be at least 75W for 8 Ohm speakers and at least 150W for 4 Ohm speakers. Make sure the voltage switch is set to the proper position (230 V is the European default setting) Proceed to step 2 when the ZonePlayer Status indicator on the ZonePlayer's front panel flashes white and the Mute button flashes green. If you have structured (built-in) wiring, connect the Ethernet cable into a live wall plate (see B in the diagram). [. . . ]