User manual SONY AIR-SA15R annexe 1

[. . . ] 4-117-794-31(1) Features The AIR-SA15R is an "S-AIR" compatible product. It is also called the "S-AIR sub unit. " Connecting this unit with an S-AIR main unit using "S-AIR" technology, you can use each unit in a remote location. For example, you can install this unit in the bedroom, and then install an S-AIR main unit in the living room. You can then listen to the music from the S-AIR main unit located in the living room by controlling this unit. Getting Started Connect the unit and S-AIR main unit to listen to sound from the S-AIR main unit. Wireless Speaker System Operating Instructions Precautions Notes on use of the S-AIR product AIR-SA15R © 2009 Sony Corporation Printed in China WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. [. . . ] By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product. Applicable accessories: Wireless Transceiver (EZWRT10/EZW-RT10A) Clean the cabinet with a soft dry cloth. Do not use any type of abrasive pad, scouring powder, or solvent, such as thinner, benzine, or alcohol. Identifying the unit with a specific S-AIR main unit (Pairing operation) Inserting the batteries to the remote Slide and remove the battery compartment lid , and insert the two supplied R03 (size AAA) batteries, side first, matching the polarities shown below. S-AIR (Sony Audio Interactive Radio frequency) Recent times have seen the rapid spread of DVD media, Digital Broadcasting, and other high-quality media. To ensure that the subtle nuances of these highquality media are transmitted with no deterioration, Sony has developed a technology called "S-AIR" for the radio transmission of digital audio signals with no compression, and has incorporated this technology into the EZW-RT10/EZW-RT10A. This technology transfers digital audio signals with no compression using the 2. 4 GHz band range of ISM band (Industrial, Scientific, and Medical band), such as wireless LANs and Bluetooth applications. It is easy to set the same S-AIR ID for the unit and SAIR main unit to establish the connection. However, if a neighbor has an S-AIR main unit with the same S-AIR ID as your S-AIR main unit, you may be able to hear the audio transmitted from your neighbor's S-AIR main unit on your system. To prevent this, you can identify the unit with a specific S-AIR main unit by performing the pairing operation. Before pairing The connection is established by the S-AIR ID (example). Your system Neighboring system Notes on using the remote This unit ID A ith normal use, the batteries should last for about six months. W o not mix an old battery with a new one or mix different types of D batteries. f you do not use the remote for a long period of time, remove the I batteries to avoid damage from battery leakage and corrosion. ID A S-AIR main unit ID A S-AIR main unit Operations Unit (AIR-SA15R/Wireless Speaker System) Remote (RM-ANU046) Troubleshooting 1 Make sure the power cord is correctly and firmly connected. Messages CANCEL : Time out without pairing. ID A : Sets the S-AIR ID to "A. " ID B : Sets the S-AIR ID to "B. " ID C : Sets the S-AIR ID to "C. " LINKED : The unit is connected to the S-AIR main unit. RMT OFF : The unit is not accepting signals from the remote because the remote control function is set to "RMT OFF. " S-AIR : Displayed from the point power of the unit is turned on until connection with the S-AIR main unit is established. TIME NG : The Daily Timer start and end times are set to the same time. Use buttons on the S-AIR sub unit whose remote control function you want to turn off. ALARM: An alarm is output. Output 2 Select the clock set mode. Press CLOCK/TIMER MENU . If the current mode appears on the display, press / repeatedly to select "CLOCK, " and then press CLOCK/TIMER ENTER . AUTO: Sound from the connected S-AIR main unit is output. However, an alarm sounds in the following cases. When communication with the S-AIR main unit is cut off. When no sound is output from the S-AIR main unit or the audio signal level is too low. When the S-AIR main unit is not ready for playback at the set start time. Note that the alarm continues to sound even if the S-AIR main unit becomes ready after the start time has passed. Information of the connected S-AIR main unit1) Model name of the connected S-AIR main unit2) Clock2) . . . When the unit is not connected to an S-AIR main unit: The S-AIR indicator is turned off. Check that the power cord is connected securely and the unit is turned on. [. . . ] Press . Daily Timer: You can wake up to the sound of the connected S-AIR main unit at a preset time. Make sure you have set the clock. 1 Press CLOCK/TIMER MENU . "SELECT" flashes in the display. 1 Press VOLUME +/ repeatedly to adjust the volume level while viewing the volume level indication on the display. /CANCEL . Hold down S-AIR CH until the band changes. 2 Press CLOCK/TIMER MENU . 3 Press / repeatedly to select "TIMER, " 4 Set the time to start playing. 2 Press CLOCK/TIMER ENTER . [. . . ]