User manual SONY CAV-CVS12ES DATASHEET

[. . . ] You can use either BP-DM10 or BP-DM20 rechargeable battery for this unit. You can use them in the same way, but their charging time and battery life are different. Check the model number of your rechargeable battery before using. Hours) When using BP-DM20 (charged for about 3 hours*) Two alkaline batteries BP-DM10 (charged for about 2 hours*) BP-DM20 + Battery case (two alkaline batteries) Two alkaline batteries + Battery case (two alkaline batteries) BP-DM10 + Battery case (two alkaline batteries) ESP function off on 11 9 If you want to play a CD right now, choose to use your player on house current. [. . . ] To connect your player to a car cassette deck, you need the following accessories: · mount kit CPM-450PC/CPM-300PC (Mount plate + Car battery cord + Car connecting pack) or · Car battery cord DCC-E245 and Car connecting pack CPA-8/CPA-9 Refer to the instruction manual of each accessory for details. The ESP (Electronic Shock Protection) function prevents the sound from skipping by using a buffer memory that stores music data for approx. Use this function when listening during a walk or playing in a car. (When the unit is used on a flat and stable place) *Charging time varies depending on how the rechargeable battery is used. Playing only the tracks you want (INTRO PGM play) C You can choose and play your favorite tracks by scanning through the beginning of each track in a CD. When the battery becomes weak, indication appears in the display. To keep the original battery capacity for a long time, recharge the battery when he battery is used up (discharged). If the battery is new or has not been used for a long time, it may not be charged completely until you charge and discharge it several times. ⷠIf the battery life becomes shoreter by about half, replace it with Sony BP-DM10 or BP-DM20 rechargeable battery. Do not use any other rechargeable battery (R6 type rechargeable battery, etc. You can lock your player against any accidental operations. ⷠWhen the batteries are not to be used for a long time, remove them. Playing tracks in random order (Shuffle Play) D You can play the tracks on a CD in random order. During play, press PLAY MODE repeatedly, until "SHUFFLE" appears. To cancel shuffle play, press PLAY MODE repeatedly until no play mode is indicated in the display. You can turn off the beep that sounds as you operate your player. Disconnect the power source (AC power adaptor, rechargeable battery or alkaline batteries). While you press and hold down p on the main unit, connect the power source again. To make the beep sound again, disconnect the power source, and then connect it without pressing p. *AMS = Automatic Music Sensor **These operations are possible during both play and pause. Then adjust the volume on the player to the level that you want to be the maximum for adjusting the volume with the remote control. Playing tracks in the order you want (RMS play) E You can program up to 22nd tracks to play in any order you choose. [. . . ] ⷠDuring play, the track number and the elapsed playing time of the current track appear. ⷠBetween the tracks, the time to the beginning of the next track will appear with the "­" indication. ⷠDuring pause, the elapsed playing time of the current point flashes. During play, press PLAY MODE repeatedly until "RMS" flashes. [. . . ]