User manual SONY CCD-TRV46E

[. . . ] Before operating the unit, please read this manual thoroughly, and retain it for future reference. Congratulations on your purchase of this Sony Handycam VisionTM camcorder. With your Handycam Vision you can capture life's precious moments with superior picture and sound quality. Your Handycam Vision is loaded with advanced features, but at the same time it is very easy to use. [. . . ] notes on superimposing a title · If you have not given any custom title, "­ ­ ­ ­ . The FADER function works while the title is displayed, however, the title does not fade. If you display the menu or title menu while superimposing a title, the title is not recorded while the menu or title menu is being displayed. Title colour changes as follows: WHITE ~ YELLOW ~ VIOLET ~ RED ~ CYAN ~ GREEN ~ BLUE Title size changes as follows: SMALL ~ LARGE Title position changes as follows: When you select the title size "SMALL", you can choose 9 positions. When you select the title size "LARGE" you can choose 8 positions. notes on the title · Depending on size or position of the title, both of the date and time or either of them is not displayed. If you input 13 characters or more for a LARGE title, the title is automatically reduced into a proper size after the position is set. When the title is displayed, LCD BRIGHT and VOLUME indicators do not appear. You can make up to two titles and store them in the camcorder. we recommend to set the POWER switch to PLAYER or eject the cassette before you begin. Your title can have up to 20 characters. (3) Turn the control dial to select the first line (CUSTOM1) or second line (CUSTOM2), then press the dial. (4) Turn the control dial to select the column of the desired character, then press the dial. (5) Turn the control dial to select the desired character, then press the dial. (6) Repeat steps 4 and 5 until you finish the title. (7) For finishing the titling work, turn the control dial to select SET, then press the dial. In step 3, select CUSTOM1 or CUSTOM2, depending on which title you want to edit, then change the title. note You cannot enter over 20 characters title. If you take 5 minutes or longer to enter characters while a cassette is in the camcorder The power goes off automatically. Turn STANDBY down once and then up again, then proceed from step 1. In step 4, turn the control dial to select [M] then press the dial. Repeat this step until all characters are deleted. [. . . ] Cassette) SP mode: 1 hour and 30 minutes LP mode: 3 hours Fastforward/rewind time (using 90 min. ) CCD-TRV26E: 18× (Optical), 36 × 1) (Digital) CCD-TRV27E/TRV36E/TRV46E: 18× (Optical), 72× 2) (Digital) 1) 220× in some areas 2) 330× in some areas Focal distance 4. 4) 0 lux (in NightShot mode)* * Object invisible for the dark can be shot with infrared lighting. ) On-screen display TN LCD/TFT active matrix method Total dot number 61, 380 (279 × 220) Input and output connectors Video output Phono jack, 1 Vp-p, 75 ohms, unbalanced Audio output Monaural, Phone jack, 327 mV (at output impedance 47 kilohms) impedance less than 2. [. . . ]