User manual SONY CDP-XE270

[. . . ] To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The instructions in this manual are for CDP-XE570, CDP-XE370, and CDP-XE270. cDP-XE570 is the model used for illustration purposes only. Any difference in operation is clearly indicated in the text, for example, "CDP-XE570 only. [. . . ] "REPEAT A-B" appears and the player repeats between the new starting and ending points. When you want to restart from the starting point A, press H during AyB Repeat. You can arrange the order of the tracks on a disc and create your own programme. You can check your programme before or after you start playing. 2 Turn lAMSL until the track you The track number that you programmed, the playing order, and the total playing time appear in the display. If you've made a mistake Each time you press this button, the display shows the track number in the programmed order. After the last track in the programme, the display shows "- END -" (or "End" for CDPXE370) and returns to the original display. If you check the order after you start playing, the display shows only the remaining track numbers. You can change your programme before you start playing. You can select the track using the number buttons on the remote. To select a track with a number over 10, use >10 (see page 9). Press CHECK until the track you don't want appears in the display, then press CLEAR (CDP-XE570/ XE370 only). Each time you in the programme press the button, the last track will be cleared. Add tracks to the end of the programme Turn lAMSL until the track number you want to add appears, then push lAMSL. When using the remote, press the number buttons of the tracks to be added (CDP -XE570/XE370 only). The programme remains until erased or until you press AOPEN/CLOSE. The programme you have created remains even after the Programme Play mode ends or you select another play mode. The total playing time doesn't appear in the display when it exceeds 100 minutes. ⷠIf you programme a track numbered over 24 (or 68 for the CDP-XE370/XE270), "­ ­ . ­ ­" appears instead of the total playing time. ⷠ"PROGRAM FULL" (or "FULL" for the CDPXE370/XE270) appears in the display when you try to add a track to a programme which already contains 24 tracks. Change the whole Hold down CLEAR until programme "CLEAR" (for the CDP-XE570) completely or "CLEAr" (for the CDP-XE370/ XE270) appears in the display. [. . . ] Do not expose the disc to direct sunlight or heat sources such as hot air ducts, nor leave it in a car parked in direct sunlight as there can be considerable rise in temperature inside the car. ⷠDo not use any commercially available stabilizer. If you do, the disc and the player may be damaged. ⷠAfter playing, store the disc in its case. [. . . ]