User manual SONY CDX-GT08

[. . . ] · If the unit starts to emit smoke or strange smells, turn off the power immediately and consult your Kenwood dealer. · Make sure not to get your fingers caught between the faceplate and the unit. · Be careful not to drop the unit or subject it to strong shock. The unit may break or crack because it contains glass parts. [. . . ] Press the [4] or [¢] button. Disc/ Folder Search Disc Search (Function of disc changer) Folder Search (Function of MP3) Selecting the disc set in the Disc changer or the folder recorded on the MP3 media. Press the [DISC­] or [DISC+] button. Fast Forwarding and Reversing Fast Forwarding Hold down on the [¢] button. Release your finger to play the disc at that point. Release your finger to play the disc at that point. Track/File/Disc/Folder Repeat Replaying the song, disc in the Disc changer or MP3 folder you're listening to. Each time the button is pressed the Repeat Play switches as shown below. In CD & External disc source Repeat play Track Repeat Disc Repeat (In Disc Changer) OFF Display "(T-)Repeat ON"/ "(T-)REP ON" "D-Repeat ON"/ "D-REP ON" "Repeat OFF"/ "REP OFF" Track/File Search Searching for a song on the disc or in the MP3 folder. -- 20 -- In MP3 source Repeat play File Repeat Folder Repeat OFF Display "File REP ON" "FOLD REP ON" "Repeat OFF" Magazine Random Play (Function of disc changer) Play the songs on all the discs in the disc changer in random order. Each time the button is pressed the Magazine Random Play turns ON or OFF. When it's ON, "M-Random ON"/ "MRDM ON" is displayed. When the [¢] button is pressed, the next song select starts. Scan Play Playing the first part of each song on the disc or MP3 folder you are listening to and searching for the song you want to listen to. 1 Start Scan Play Press the [SCAN] button. "Scan ON"/ "SCAN ON" is displayed. Release it when the song you want to listen to is played Press the [SCAN] button. 2 Random Play Play all the songs on the disc or MP3 folder in random order. Each time the button is pressed Random Play turns ON or OFF. Enter Menu mode Press the [MENU] button for at least 1 second. When "MENU" is displayed, "Security"/ "SECURITY" is displayed. Enter Security Code mode Press the [4] or [¢] button for at least 1 second. When "ENTER" is displayed, "CODE" is displayed. Select the digits to enter Press the [4] or [¢] button. Select the Security Code numbers Press the [FM] or [AM] button. Repeat steps 4 and 5, and complete the Security Code. Confirm the Security Code Press the [¢] button for at least 3 seconds. When "RE-ENTER" is displayed, "CODE" is displayed. Do the step 4 through 7 step operation, and reenter the security code. The Security Code function activates. If you enter a Code different from your Security Code, you have to start over from step 4. 1 Enter Menu mode Press the [MENU] button for at least 1 second. [. . . ] The antenna control wire is not connected. 40 Connect the wire correctly, referring to the section on <Connecting Wires to Terminals>. ? It isn't the set Traffic information sound volume. 43 The set sound volume is less than the tuner sound volume. If the tuner sound volume is louder than the set sound volume, the tuner sound volume is used. MP3 source ? Disc source Cannot play an MP3. 67 The media is scratched or dirty. 69 Clean the media, referring to the CD cleaning of the section on <About CDs> (page 5). The sound skips when an MP3 is being played. 73-1 The media is scratched or dirty. [. . . ]