User manual SONY CDX-GT565UP

[. . . ] 11 Playing back a Playlist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Repeat Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Random Play) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Scanning Programmes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] · Except when the HPF and LPF are turned to OFF, the subwoofer is in monaural mode. · When the subwoofer is set to OFF, LPF mode and change of phase does not work. · Depending on the connected devices, some functions and display indications do not work. 16-EN Recalling the Stored built-in Crossover Settings 4 Press g or f to select your desired frequency. Adjustable frequency bands: BAND1 : 40Hz, 60Hz, 90Hz BAND2 : 100Hz, 150Hz, 200Hz BAND3 : 500Hz, 700Hz, 1kHz, 2kHz, 4kHz, 6kHz BAND4 : 10kHz, 12. 5kHz, 15kHz 1 2 3 4 Press and hold MENU for at least 2 seconds. Press the preset button (1 or 2) to which your desired built-in crossover settings are assigned. Press and hold MENU for at least 2 seconds to return to normal mode, or press MENU and select RETURN to return to normal mode. 5 6 Turn the Rotary encoder to adjust the level. Press SOURCE/POWER to select your desired band width (Q). Adjustable band width: BAND1 : 1. 0, 2. 0, 3. 0, BAND2 : 1. 0, 1. 5, 2. 0 BAND3 : 1. 0, 2. 0, 3. 0 BAND4 : 1. 0 (fixed band width) · The setting mode returns to normal mode if no buttons are pressed within 15 seconds. Equalizer Presets 10 typical equalizer settings are preset at the factory for a variety of musical source material. To store the adjusted curve 1) Press and hold, for at least 2 seconds, the preset buttons (1 or 2) into which you wish to store the adjusted curve. 1 2 Press MENU to select Factory's EQ (P-EQ for CDA9830R). Press either g or f. With each press of the button, the equalizer mode will display the selected equalizer characteristic. FLAT(OFF) ROCK POPS JAZZ & BLUES (JAZZ) ELECTRICAL (ELECTRIC) HIPHOP & RAP (HIPHOP) EASY LISTEN (EASY) COUNTRY CLASSICAL (CLASSIC) NEWS USER'S EQ 1, 2 (USERS 1, 2) FLAT(OFF) 7 8 9 To set another channel, repeat steps 3 to 6. Press the Rotary encoder to confirm the adjusted contents. The adjusted contents are not stored if the Rotary encoder is not pressed. After setting, press and hold MENU for at least 2 seconds to return to normal mode, or press MENU and select RETURN to return to normal mode. 3 · EQ mode is automatically cancelled if no buttons are pressed within 15 seconds. · This function is inoperable when DEFEAT is set to ON (page 16). Press and hold MENU for at least 2 seconds to return to normal mode, or press MENU and select RETURN to return to normal mode. Recalling the Stored Equalizer Curve · This function is inoperable when DEFEAT is set to ON (page 16). · EQ mode is automatically cancelled if no buttons are pressed within 15 seconds. · By selecting USER'S EQ 1 or EQ 2 (USERS 1 or USERS 2 for CDX-GT565UP), you can recall the stored preset number in "Adjusting and Storing the Equalizer Curve. " 1 2 3 4 Press and hold MENU for at least 2 seconds. Press MENU to select USER'S EQ (USERS for CDX-GT565UP). Here we calculate the time correction value for the front left speaker in the diagram on the above. Press BAND/TEL. to select the speakers to be adjusted (see below). FL RL FR RR FL RL FR RR Front (left-right) speakers Left (front-rear) speakers FL FR RR Conditions: Farthest Speaker ­ listening position : 2. 25 m (88-9/16") Front left speaker ­ listening position : 0. 5 m (19-11/16") Calculation: L = 2. 25 m ­ 0. 5 m = 1. 75 m (68-7/8") Time correction = 1. 75 ÷ 343*2 × 1000 = 5. 1 (ms) FL RL FR RR RL *2 Speed of sound: 343 m/s (765 mph) at 20°C In other words, giving the front left speaker a time correction value of 5. 1 ms makes it seem as if its distance from the listener is the same as the distance to the farthest speaker. Time correction eliminates the differences in the time required for the sound to reach the listening position. The time of the front left speaker is corrected by 5. 1 ms so that its sound reaches the listening position at the same time as the sound of other speakers. Rear (left-right) speakers Right (front-rear) speakers 5 6 7 Turn the Rotary encoder to adjust the delay (see Time Difference Table). To set another channel (speakers), repeat steps 4 and 5. Press the Rotary encoder to confirm the adjusted contents. The adjusted contents are not stored if the Rotary encoder is not pressed. 18-EN 8 After setting, press and hold MENU for at least 2 seconds to return to normal mode, or press MENU and select RETURN to return to normal mode. Time Difference Table Time Difference (ms) 0. 0 0. 1 0. 2 0. 3 0. 4 0. 5 0. 6 0. 7 0. 8 0. 9 1. 0 1. 1 1. 2 1. 3 1. 4 1. 5 1. 6 1. 7 1. 8 1. 9 2. 0 2. 1 2. 2 2. 3 2. 4 2. 5 2. 6 2. 7 2. 8 2. 9 3. 0 3. 1 3. 2 3. 3 3. 4 3. 5 3. 6 3. 7 3. 8 3. 9 4. 0 4. 1 4. 2 4. 3 4. 4 4. 5 4. 6 4. 7 4. 8 4. 9 5. 0 Time Difference (ms) 5. 1 5. 2 5. 3 5. 4 5. 5 5. 6 5. 7 5. 8 5. 9 6. 0 6. 1 6. 2 6. 3 6. 4 6. 5 6. 6 6. 7 6. 8 6. 9 7. 0 7. 1 7. 2 7. 3 7. 4 7. 5 7. 6 7. 7 7. 8 7. 9 8. 0 8. 1 8. 2 8. 3 8. 4 8. 5 8. 6 8. 7 8. 8 8. 9 9. 0 9. 1 9. 2 9. 3 9. 4 9. 5 9. 6 9. 7 9. 8 9. 9 Delay Number 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Distance cm (inch) 0. 0 3. 4 (1-3/8") 6. 9 (2-3/4") 10. 3 (4-1/16") 13. 7 (5-3/8") 17. 2 (6-13/16") 20. 6 (8-1/8") 24. 0 (9-7/16") 27. 4 (10-13/16") 30. 9 (12-3/16") 34. 3 (13-1/2") 37. 7 (14-13/16") 41. 2 (16-1/4") 44. 6 (17-9/16") 48. 0 (18-7/8") 51. 5 (20-1/4") 54. 9 (21-5/8") 58. 3 (22-15/16") 61. 7 (24-1/4") 65. 2 (25-5/8") 68. 6 (27") 72. 0 (28-3/8") 75. 5 (29-11/16") 78. 9 (31-1/16") 82. 3 (32-3/8") 85. 8 (33-3/4") 89. 2 (35-1/8") 92. 6 (36-7/16") 96. 0 (37-3/4") 99. 5 (39-13/16") 102. 9 (40-1/2") 106. 3 (41-7/8") 109. 8 (43-1/4") 113. 2 (44-9/16") 116. 6 (45-7/8") 120. 1 (47-5/16") 123. 5 (48-5/8") 126. 9 (49-15/16") 130. 3 (51-5/16") 133. 8 (52-11/16") 137. 2 (54") 140. 6 (55-3/8") 144. 1 (56-3/4") 147. 5 (58-1/16") 150. 9 (59-3/8") 154. 4 (60-3/4") 157. 8 (62-1/8") 161. 2 (63-7/16") 164. 6 (64-3/4") 168. 1 (66-3/16") 171. 5 (67-1/2") Delay Number 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 Distance cm (inch) 174. 9 (68-7/8") 178. 4 (70-1/4") 181. 8 (71-9/16") 185. 2 (72-7/8") 188. 7 (74-1/4") 192. 1 (75-5/8") 195. 5 (77") 198. 9 (78-5/16") 202. 4 (79-11/16") 205. 8 (81") 209. 2 (82-3/8") 212. 7 (83-3/4") 216. 1 (85-1/16") 219. 5 (86-3/8") 223. 0 (87-3/4") 226. 4 (89-1/8") 229. 8 (90-1/2") 233. 2 (91-13/16") 236. 7 (93-3/16") 240. 1 (94-1/2") 243. 5 (95-7/8") 247. 0 (97-1/4") 250. 4 (98-9/16") 253. 8 (99-7/8") 257. 3 (101-1/4") 260. 7 (102-5/8") 264. 1 (104") 267. 5 (105-5/16") 271. 0 (106-11/16") 274. 4 (108-1/16") 277. 8 (109-3/8") 281. 3 (110-3/4") 284. 7 (112-1/16") 288. 1 (113-1/16") 291. 6 (114-3/4") 295. 0 (116-1/8") 298. 4 (117-1/2") 301. 8 (118-13/16") 305. 3 (120-3/16") 308. 7 (121-1/2") 312. 1 (122-7/8") 315. 6 (124-1/4") 319. 0 (125-9/16") 322. 4 (126-7/8") 325. 9 (128-5/16") 329. 3 (129-5/8") 332. 7 (131") 336. 1 (132-5/16") 339. 6 (133-11/16") · Any manual time correction adjustments will also affect corrections made in Bass Focus. · Bass Focus mode is automatically cancelled if no operation is performed within 15 seconds. Example setting for steps 4 and 5 (1) Press BAND/TEL. to select the front (left and right) speakers. Then turn the Rotary encoder to select 1. 5 ms (Delay no. The time difference is 1. 5 ms for both front (left and right) speakers. 1. 5ms 1. 5ms 16 17 18 19 20 *1 21 22 23 24 (2) Press BAND/TEL. to select the left (front and rear) speakers. [. . . ] If your vehicle does not have the Mounting Support, reinforce the head unit with the metal mounting strap (not supplied). Connect all the leads of the CDA-9831R/CDX-GT565UP according to details described in the CONNECTION section. 33-EN Connections 1 To vehicle Display Interface ISO Antenna Convertor Plug Antenna 2 ISO Antenna Plug (Pink/Black) AUDIO INTERRUPT IN 3 To vehicle phone (Blue/White) REMOTE TURN-ON 4 To amplifier or equalizer (Orange) DIMMER To the instrument cluster illumination lead (CDA-9831R only) 5 6 " 7 9 Battery Speakers (Green) (Red) (Black) (Blue) IGNITION GND POWER ANT To power antenna ! Ignition Key BATTERY (Yellow) 8 ( ) ~ + , . / Rear Left & (Green/Black) (White) (White/Black) (Grey/Black) (Grey) (Violet/Black) (Violet) Front Left Front Right Rear Right : # $ = < Ai-NET % ; CD Changer (Sold Separately) NORM EQ/DIV 1 Speakers Front Left ? Amplifier Front Right ? Rear Left Amplifier Rear Right > ? Amplifier Subwoofers 34-EN * 1 The label is attached on the bottom of the unit. 1 Vehicle Display Interface Connector Outputs Vehicle Display Interface control signals. Connect this to the optional Vehicle Display Interface box. [. . . ]