User manual SONY CMT-CX5BIP

[. . . ] 4-278-006-12 (1) Location of Controls Unit (Top) Getting Started Speakers Power 1 Connect the power cord to the AC adapter. 2 Connect the AC adapter to the unit, and then plug the power cord in to a wall outlet. The demonstration appears in the display. When you press , the system turns on and the demonstration automatically ends. [. . . ] You can also view DAB/DAB+ station information such as the service name, channel label, preset number, frequency, DLS (Dynamic Label Segment), or ensemble label. The STANDBY indicator on the unit lights up when the system is off. 2 Find your problem in the checklist below, and take the indicated corrective action. If the issue persists, contact your nearest Sony dealer. If the STANDBY indicator flashes If the battery of the iPod/iPhone is empty, it may not work with this system. In such a case, recharge it with a computer, etc. Shut down any other iOS applications running on the iPod/iPhone. For details, refer to the operation manual supplied with the iPod/iPhone. Make sure the iPod/iPhone is connected securely. Make sure the iPod/iPhone is updated with the latest software. If not, update the iPod/iPhone before using with the system. Because the operation of the system and the iPod/ iPhone are different, you may not operate the iPod/ iPhone using buttons on the remote or unit. In this case, use the control buttons on the iPod/iPhone. System: Compact disc and digital audio system Laser Diode Properties Emission Duration: Continuous Laser Output*: Less than 44. 6µW * This output is the value measurement at a distance of 200mm from the objective lens surface on the Optical Pick-up Block with 7mm aperture. Frequency response: 20 Hz 20 kHz Signal-to-noise ratio: More than 90 dB Dynamic range: More than 90 dB Tunersection FM stereo, FM superheterodyne tuner Tuning range: 87. 5 MHz 108. 0 MHz (50 kHz step) Antenna: FM lead antenna 2) The system offers the following display modes. Display mode Demonstration Power Saving mode2) When the system is off1) The demonstration is turned on. The display is turned off to conserve power. The timer and clock continue to operate. The clock is displayed. To view program information Press DISPLAY repeatedly. Immediately unplug the power cord, and check the following items. Are the + and speaker cords short-circuited? Is anything blocking the ventilation holes of the system? Is the iPod/iPhone connector short-circuited?After the STANDBY indicator stops flashing, reconnect the power cord, and turn on the system. If the issue persists, contact your nearest Sony dealer. The iPod/iPhone cannot be charged. Precautions Discs that this system CAN play Audio CD CD-R/CD-RW (audio data/MP3 files) If the battery of the iPod/iPhone is empty, the system may not be able to charge it even if you connect it to the system. In such a case, recharge it with a computer, etc. Make sure the iPod/iPhone is connected securely. [. . . ] To turn on the function, repeat the procedure until "AUTO STBY ON" appears. Notes "AUTO STBY" appears in the display for two minutes before the system enters Standby mode. The Automatic Standby function is invalid for the tuner function (DAB/FM), even when you have enabled it. The system may not enter Standby mode automatically in the following cases; while an audio signal is being detected. during playback of audio tracks or files. [. . . ]