User manual SONY CMT-EH15

[. . . ] 3-294-218-13(1) Micro HI-FI Component System Operating Instructions Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems) Note on DualDiscs CMT-EH15 This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources. [. . . ] folder levels (the tree structure of files) is 8. Compatibility with all MP3 encoding/writing software, recording device, and recording media cannot be guaranteed. Incompatible MP3 discs may produce noise or interrupted audio or may not play at all. Using optional audio components To connect an optional headphones Connect headphones to the PHONES jack on the unit. Notes on playing multisession discs If the disc begins with a CD-DA (or MP3) session, it is recognized as a CD-DA (or MP3) disc, and playback continues until another session is encountered. A disc with a mixed CD format is recognized as a CD-DA (audio) disc. To connect an optional component Selecting a music source Press the following buttons (or press FUNCTION repeatedly). To select CD Press Connect additional audio source component to the AUDIO IN jack on the unit using an audio analog cord (not supplied). Turn down the volume on the system, and then select the AUDIO IN function. CD . FUNCTION repeatedly until "TAPE" appears. AUDIO IN . Tuner Tape Component* (connected using an audio cord) Wall socket * If the component has the AVLS (Automatic Volume Limiter System) or BASS BOOST function, turn off the function to avoid distorted sound from the speakers. Other Operations Creating your own CD program (Program Play) Use buttons on the remote to create your own program. Troubleshooting Recording onto a tape Use a TYPE I (normal) tape only. If your system has a voltage selector, is the voltage selector set to the correct voltage?After the STANDBY indicator stops flashing, reconnect the power cord, and turn on the system. If the issue persists, contact your nearest Sony dealer. The unit is not disconnected from the mains as long as it is connected to the AC outlet, even if the unit itself has been turned off. Completely disconnect the power cord (mains lead) from the wall socket (mains) if it is not going to be used for an extended period of time. When unplugging the unit, always grip the plug. Should any solid object or liquid get into the system, unplug the system, and have it checked by qualified personnel before operating it again. The AC power cord can be changed only by a qualified service facility. Specifications Mainunit Amplifiersection European and Russian models: DIN power output (rated): 4 + 4 W (4 ohms at 1 kHz, DIN) Continuous RMS power output (reference): 5 + 5 W (4 ohms at 1 kHz, 10% THD) Music power output (reference): 7 + 7 W Other models: DIN power output (rated): 4 + 4 W (4 ohms at 1 kHz, DIN) Continuous RMS power output (reference): 5 + 5 W (4 ohms at 1 kHz, 10% THD) Inputs AUDIO IN (stereo mini jack): Sensitivity 800 mV, impedance 47 kilohms Outputs PHONES (stereo mini jack): Accepts headphones with an impedance of 8 ohms or more SPEAKER: Accepts impedance of 4 ohms On placement General The system unexpectedly shuts off while operating. Are the + and speaker cords short-circuited?Make sure the speaker cords are correctly connected. 4 Press ENTER to add the track or file to the program. 3 Start recording. Press (record) , and then start playing the desired recording source. If there is noise while recording from the tuner, reposition the appropriate antenna to reduce the noise. While recording, you cannot listen to other sources. To stop recording, press . Tip We recommend that you press first, and then press to avoid noise being recorded when you stop recording. 5 Repeat steps 3 through 4 to program additional tracks or files, up to a total of 15 tracks or files. Display examples Display indicates There is no sound. 6 To play your program of tracks or files, press . The program remains available until you open the CD compartment. To play it again, select the CD function, and then press . To cancel Program Play, press PLAY MODE repeatedly until "PGM" disappears while the player is stopped. To delete the last track or file of the program, press CLEAR while the player is stopped. To view program information, such as total track number of the program, press DISPLAY repeatedly. Are the + and speaker cords short-circuited? [. . . ] a disc that has many folders. About a tape longer than 90 minutes Discs that this system CANNOT play The use of the tape with more than 90 minutes of play time is not recommended except for long, continuous recording or playback. Tuner Severe hum or noise, or stations cannot be received. ("TUNED" or "STEREO" flashes on the display. ) 5 Press +/ repeatedly to select your desired 5 Use the same procedure as in step 4 to set the time to stop playing. preset number. If another station is already assigned to the selected preset number, the station is replaced by the new stations. 6 Select the sound source. Press / repeatedly until the desired sound source appears, and then press ENTER . The display shows the timer settings. 6 Press ENTER . [. . . ]