User manual SONY CMT-HX50BTR

[. . . ] 3-294-004-12(1) Micro HI-FI Component System Operating Instructions CMT-HX70BTR CMT-HX50BTR © 2008 Sony Corporation WARNING To reduce the risk of fire, do not cover the ventilation opening of the apparatus with newspapers, tablecloths, curtains, etc. Do not place the naked flame sources such as lighted candles on the apparatus. To reduce the risk of fire or electric shock, do not expose this apparatus to dripping or splashing, and do not place objects filled with liquids, such as vases, on the apparatus. As the main plug is used to disconnect the unit from the mains, connect the unit to an easily accessible AC outlet. [. . . ] " appears when the total program time exceeds 100 minutes for a CD, or when you select a CD track whose number is 21 or over, or when you select an MP3 file. USB The total program time cannot be displayed, so " . " appears. 1 Select the desired function. CD Press FUNCTION +/ (or FUNCTION on the unit) repeatedly to select the CD function. USB Press FUNCTION +/ (or FUNCTION on the unit) repeatedly to select the USB function. Other Operations 5 6 Repeat steps 3 through 4 to program additional tracks or files, up to a total of 25 tracks or files. To play your program of tracks or files, press . The program remains available until you open the disc tray or remove the USB device. To play the same program again, press . 2 3 Press PLAY MODE repeatedly until "PGM" appears while the system is stopped. Press / repeatedly until the desired track or file number appears. When programming files, press +/ repeatedly to select the desired folder, and then select the desired file. Example: When programming tracks on a CD To cancel Program Play Press PLAY MODE repeatedly until "PGM" disappears while the system is stopped. To delete the last track or file of the program Press CLEAR while the system is stopped. Selected track or file number Total playing time of program (including selected track or file) GB Presetting radio stations You can preset your favorite radio stations and tune them in instantly by selecting the corresponding preset number. Use buttons on the remote to preset stations. 6 To call up a preset radio station, press TUNING MODE repeatedly until "PRESET" appears, and then press +/ repeatedly to select the desired preset number. 1 2 Tune in the desired station (see "Listening to the radio" (page 14)). Press TUNER MEMORY . Preset number 3 Press +/ repeatedly to select your desired preset number. If another station is already assigned to the selected preset number, the station is replaced by the new stations. 4 5 Press . Repeat steps 1 through 4 to store other stations. You can preset up to 20 FM and 10 AM stations. The preset stations are retained for about half a day even if you disconnect the power cord or if a power failure occurs. 0GB Using the Timers The system offers two timer functions. If you use the Play Timer with the Sleep Timer, the Sleep Timer has priority. SleepTimer: You can fall asleep to music. This function works even if the clock is not set. 6 7 Select the sound source. Press / repeatedly until the desired sound source appears, and then press . The display shows the timer settings. Press / to turn off the system. The system turns on 15 seconds before the preset time. If the system is on at the preset time, the Play Timer will not play. Other Operations Press SLEEP repeatedly. If you select "AUTO, " the system automatically turns off after the current disc or USB device stops or in 100 minutes. PlayTimer: You can wake up to CD, tuner or optional USB device at a preset time. Use buttons on the remote to control the Play Timer. Make sure you have set the clock. Note Before the system is turned off, if a connection is made with the Bluetooth headphones, sounds played by the Play Timer may be output to the Bluetooth headphones. To activate or check the timer again 1 Press TIMER MENU . 2 Press . "TIMER SEL?" flashes in the display. 1 Prepare the sound source. Prepare the sound source, and then press VOLUME +/ to adjust the volume. To start from a specific track or file, create your own program (page 29). 3 Press / repeatedly to select "PLAY SEL?. " . 4 Press 2 3 To cancel the timer 1 Press TIMER MENU . Press / repeatedly to select "PLAY SET?, " and then press . "ON TIME" appears, and the hour indication flashes. "TIMER SEL?" flashes in the display. 3 Press / repeatedly to select "TIMER OFF?. " . 4 5 Set the time to start playing. 4 Press Press / repeatedly to set the hour, and then press . [. . . ] The effective communication range may become shorter under the following conditions. When a person, metal object, wall or other obstruction is between the devices with a Bluetooth connection Locations where a wireless LAN is installed Around microwave ovens that are in use Locations where other electromagnetic waves occur Effects of other devices Bluetooth devices and wireless LAN (IEEE 802. 11b/g) use the same frequency band (2. 4 GHz). When using your Bluetooth device near a device with wireless LAN capability, electromagnetic interference may occur. This could result in lower data transfer rates, noise, or inability to connect. [. . . ]