User manual SONY CMT-S20

[. . . ] Note on DualDiscs 4-460-924-13(2) Unit A DualDisc is a two sided disc product which mates DVD recorded material on one side with digital audio material on the other side. However, since the audio material side does not conform to the Compact Disc (CD) standard, playback on this product is not guaranteed. Getting Started Listening to the radio 1 Select the FM function. For automatic scanning Press TUNING MODE  repeatedly until “AUTO” appears, and then press TUNING+/ TUNING . [. . . ] If “PROTECT” appears on the display Immediately unplug the power cord, and check the following items after “PROTECT” disappears.  Are the + and  speaker cords shortcircuited?Ώ Is anything blocking the ventilation holes of the system?After you have checked these above items and found to be all right, reconnect the power cord, and turn on the system. If the issue persists, contact your nearest Sony dealer. Several radio stations can be heard at the same time. Ώ Try another place and orientation for better antenna reception. Ώ Bundle the antenna cable using commercially available cord clips, for example, and adjust the cable length. Outputs SPEAKERS: Accepts impedance of 8 ohms CD player section System: Compact disc and digital audio system Laser Diode Properties Emission Duration: Continuous Laser Output*: Less than 44. 6µW * This output is the value measurement at a distance of 200mm from the objective lens surface on the Optical Pick-up Block with 7mm aperture. Selected track or file number Total playing time of the selected track (CD-DA disc only) Notes on the display information  Characters that cannot be displayed appear as “_”. Ώ The following are not displayed;  total playing time for an MP3/WMA disc and a USB device.  remaining playing time for an MP3/WMA file. Ώ The following are not displayed correctly;  elapsed playing time of an MP3/WMA file encoded using VBR (variable bit rate). Ώ folder and file names that do not follow either the ISO9660 Level 1, Level 2 or Joliet in the expansion format. Ώ The following are displayed;  remaining playing time for a track. Ώ ID3 tag information for MP3 files when ID3 version 1 and version 2 tags are used (ID3 version 2 tag information display has priority when both ID3 version 1 and version 2 tags are used for a single MP3 file). Ώ up to 31 characters of ID3 tag information using uppercase letters (A to Z), numbers (0 to 9), and symbols (+ – . To reset the system to factory settings If the system still does not operate properly, reset the system to factory settings. “OVER CURRENT” appears. Ώ A problem has been detected with the level of electrical current from the (USB) port . Turn off the system and remove the USB device from the (USB) port . [. . . ]  Set the play mode to Normal Play mode. This speaker system is not magnetically shielded, and the picture on nearby TV sets may become magnetically distorted. In this situation, turn off the TV, wait 15 to 30 minutes, and turn it back on. If there is no improvement, move the speakers far away from the TV. [. . . ]