User manual SONY D-FJ041

[. . . ] Should you notice an abnormality in the AC power adaptor, disconnect it from the AC outlet immediately. Avoid using headphones at high volume. Hearing experts advise against continuous, loud and extended play. If you experience a ringing in your ears, reduce volume or discontinue use. General Power requirements: · Two LR6 (size AA) batteries: 1. 5 V DC × 2 · AC power adaptor (DC IN 4. 5 V jack): 220 V, 50 Hz (Model for Argentina) Dimensions (w/h/d) (without projecting parts and controls): Approx. [. . . ] ­ Increase the separation between the equipment and receiver. ­ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ­ Consult the dealer or an experienced radio/TV technician for help. You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. On the CD player · Keep the lens on the CD player clean and do not touch it. If you do so, the lens may be damaged and the CD player will not operate properly. · Do not put any heavy object on top of the CD player. The CD player and the CD may be damaged. · Do not leave the CD player in a location near heat sources, or in a place subject to direct sunlight, excessive dust or sand, moisture, rain, mechanical shock, unleveled surface, or in a car with its windows closed. · If the CD player causes interference to the radio or television reception, turn off the CD player or move it away from the radio or television. · Discs with non-standard shapes (e. g. , heart, square, star) cannot be played on this CD player. Attempting to do so may damage the CD player. Do not use such discs. Specifications CD player System: Compact disc digital audio system Laser diode properties: Emission duration: Continuous Laser output: Less than 44. 6 µW (This output is the value measured at a distance of 200 mm from the objective lens surface on the optical pick-up block with 7 mm aperture. ) CAUTION The use of optical instruments with this product will increase eye hazard. Certain countries may regulate disposal of the battery used to power this product. Please consult with your local authority. Radio Frequency range · USA/Latin American models 9 kHz step: FM: 87. 5 - 108. 0 MHz AM: 531 - 1 710 kHz 10 kHz step: FM: 87. 5 - 108. 0 MHz AM: 530 - 1 710 kHz AMS* / search function Remaining battery power Bookmark Play mode MONO LOCAL PRESET Band Track number/ Preset number Playing time/Frequency Sound mode * The button has a tactile dot. Headphones P MODE/ VOL ­/+* OPEN HOLD (rear) Display AC power adaptor / · TUNE ­/+ *(play/pause)/ ENTER (stop) · RADIO OFF SOUND/AVLS (headphones) jack RADIO ON/ BAND DC IN 4. 5 V to an AC outlet *Automatic Music Sensor To find the beginning of the previous/current/next/ succeeding track(s): Press / repeatedly. To go backward/forward quickly: Press and hold /. Tuning in the station quickly Press and hold TUNE + or ­ in step 3 until the frequency digits begin to change on the display. The CD player automatically scans the radio frequencies and stops when it finds a clear station. Presetting Radio Stations You can preset up to 30 stations: 20 for FM and 10 for AM. Play mode function During play, press P MODE/ repeatedly: No indication (normal play) "1"(single track play) "SHUF"(shuffle play) " "(Bookmark play) To repeat the play mode you selected, press and hold P MODE/ until " " appears. Improving broadcast reception For FM, extend the headphones cord. G-PROTECTION function The function provides protection against sound skipping during many active uses. * The default setting is "G-on. " To select "G-off, " press while you keep pressing during stop. To enjoy high quality CD sound, select "G-off". [. . . ] * If "LOCAL" disappears from the display, start from Step 1. To cancel the LOCAL setting, press SOUND/AVLS, and then press /ENTER so that "LOCAL" disappears from the display. Playing Preset Radio Stations 1 Press RADIO ON/BAND to select the band. 2 When "PRESET" does not appear on the display, press P MODE/ to enter the preset mode. "PRESET" appears on the display. [. . . ]