User manual SONY D-NE10

[. . . ] Owner's Record The model number is located at the rear and the serial number is located inside the lid of the CD player. Record the serial number in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. To prevent fire or shock hazard, do not expose the unit to rain or moisture. [. . . ] (HOLD) You can lock the controls on your CD player to prevent accidental button presses. The OPERATION lamp flashes if you press any button when the HOLD function is activated. slide HOLD in the direction of the arrow. You can use the HOLD function with both the CD player and the remote control. You can still operate your CD player using the remote control when HOLD on the remote control is set to off. Even if the HOLD function is working, "HOLD" will not appear in the display of the remote control. Or > to select "TIMER, " then press the jog lever to enter the selection. If you have changed the setting, the length of time already set appears. Turn VOL +/­ to select the length of time you want to set, then press the jog lever to enter the selection. To check the length of time before the CD player stops playback During play, perform steps 1 - 3. Turning off the beep sound You can turn off the beep sound that is heard from your headphones/earphones when you operate your CD player. Setting OPERATION lamp LCD backlight on the CD player on the remote control Turned off Turned off Lights up for about 5 seconds when you press a button and also lights up between tracks Lights up for about 5 seconds when you press a button Or > to select "BEEP, " then press the jog lever to enter the selection. Or > to select "OFF, " then press the jog lever to enter the selection. LIGHT OFF LIGHT 1 Lights up fully during play or during operation LIGHT 2* Lights up with less brightness during play or during operation * You can save power by selecting "LIGHT 2" rather than "LIGHT 1. To turn on the beep sound Perform steps 1 - 3, changing the BEEP setting to "ON. The LCD backlight is always turned on when you are using the AC power adaptor. You can select lighting options for the LCD backlight on the remote control and the OPERATION lamp on the CD player so that you can save battery power. Or > to select "LIGHT, " then press the jog lever to enter the selection. Or > to select "LIGHT OFF" or "LIGHT 2, " then press the jog lever to enter the selection. (ATRAC CD only) You can play live concert music, etc. While play is stopped, press DISPLAY until the display changes. Or > to select "SEAMLESS, " then press the jog lever to enter the selection. [. . . ] the LCD display becomes hard to see or slows down. Cause and/or corrective action c The CD player is designed to stop the rotation of an ATRAC CD or MP3 CD during playback to reduce the power consumption. c There are no ATRAC3plus/ATRAC3/MP3 files in the CD. C A CD-R/RW from which the data has been erased is being used. [. . . ]