User manual SONY D-NE718CK

[. . . ] To prevent fire or shock hazard, do not expose the unit to rain or moisture. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. To prevent fire, do not cover the ventilation of the apparatus with newspapers, tablecloths, curtains, etc. and don't place lighted candles on the apparatus. [. . . ] Connect the power source while pressing x/CHARGE for about one second or more. Flashes when the volume is turned up beyond a certain level. To turn off the AVLS function Press and hold SOUND until "AVLS OFF" appears in the display. note If you use the SOUND function and the AVLS function at the same time, sound may be distorted. To turn on the beep sound Remove the power source and then connect the power source without pressing x/CHARGE. (HOLD) You can lock the controls on your CD player to prevent accidental button presses. slide HOLD in the direction of the arrow. "HOLD" flashes if you press any button when the HOLD function is activated. Where to place your CD player ⷠInstall the CD player in a location which: ­ does not interfere with your driving. ⭠is not dangerous for passengers. ­ does not interfere with the glove box lid or ashtray. ­ is stable, and where nothing around it may interfere with installation. ⷠDo not install the CD player near heat sources or where subject to direct sunlight, excessive dust, or moisture (especially on a dashboard). Please understand that we will not incur any obligations for troubles caused by incorrect installation. If you have any questions or problems concerning your CD player, please contact your nearest Sony dealer. Turn down the volume of the car cassette deck before inserting the car connecting pack. Mounting your CD player Attach the CD player to the console box with the supplied Velcro tapes. Affix the narrow tapes to the CD player and the broad tapes to the console box, etc. Bottom of the CD player Do not affix Velcro tapes to the name plate or any control. ⷠWhen you are going to park your car for a long period of time, remove the CD player from the console box and place it where it will not be exposed to direct sunlight. Be sure to use a fuse of the same amperage and length as the one to be replaced. Never use a piece of wire as a substitute for the fuse. [. . . ] Playback starts from the point you stopped. To start play from the first track, press u during stop until the first track starts playing, or open the lid of the CD player. Or remove all power sources, then insert the batteries or connect the AC power adaptor again. Troubleshooting Symptom During playback of an ATRAC CD or MP3 CD, the CD does not rotate but you can hear the sound normally. [. . . ]