User manual SONY D-NF600

[. . . ] To prevent fire or shock hazard, do not expose the unit to rain or moisture. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. To prevent fire, do not cover the ventilation of the apparatus with newspapers, tablecloths, curtains, etc. and don't place lighted candles on the apparatus. [. . . ] Turn the jog dial to select "TIMER, " then press DISPLAY/MENU to enter the selection. Turn the jog dial to select "10 min*, " then press DISPLAY/MENU. If you have changed the setting, the length of time already set appears. Turn the jog dial to select the length of time you want to set from "01 min" to "99 min", then press DISPLAY/MENU to enter the selection. To check the length of time before the CD player stops playback During play, perform steps 1 - 3. Turning off the beep sound You can turn off the beep sound that is heard from your headphones/earphones when you operate your CD player. You can select lighting options for the OPR lamp on the CD player so that you can save battery power. Turn the jog dial to select "OPTION, " then press DISPLAY/MENU. Turn the jog dial to select "BEEP, " then press DISPLAY/MENU to enter the selection. Turn the jog dial to select "OFF, " then press DISPLAY/MENU to enter the selection. Turn the jog dial to select "OPTION, " then press DISPLAY/MENU. Turn the jog dial to select "LIGHT, " then press DISPLAY/MENU to enter the selection. Turn the jog dial to select "LIGHT OFF" or "LIGHT 2, " then press DISPLAY/MENU to enter the selection. To turn on the beep sound Perform steps 1 - 3, changing the BEEP setting to "ON. Setting LIGHT OFF LIGHT 1 LIGHT 2* OPR lamp Turned off Lights up fully during play or during operation Lights up with less brightness during play or during operation * You can save power by selecting "LIGHT 2" rather than "LIGHT 1. (ATRAC CD only) You can play live concert music, etc. While play is stopped, press DISPLAY/MENU until the MENU screen appears. Turn the jog dial to select "OPTION, " then press DISPLAY/MENU. Turn the jog dial to select "SEAMLESS, " then press DISPLAY/MENU to enter the selection. Turn the jog dial to select "ON, " then press DISPLAY/MENU to enter the selection. The tracks may not play continuously depending on how the source music was recorded. Press RADIO ON/BAND until the band you want appears. [. . . ] C A CD-R/RW from which the data has been erased is being used. C The CD player is reading the information on the CD. C You are using your CD player at high temperatures (above 40°C/ 104°F) or at low temperatures (below 0°C/32°F). At room temperature, the display will return to its normal operating condition. [. . . ]