User manual SONY DAV-FX900W

[. . . ] 2-660-929-12(1) DVD Home Theatre System Operating Instructions DAV-FX900W ©2006 Sony Corporation 3 WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. Caution ­ The use of optical instruments with this product will increase eye hazard. and on, the user is encouraged to try to correct the interference by one or more of the following measures: ­ Reorient or relocate the receiving antenna (aerial). ­ Increase the separation between the equipment and receiver. ­ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. [. . . ] All fees and programming subject to change. Channels with frequent explicit language are indicated with an XL. Channel blocking is available for XM radio receivers by calling 1800-XMRADIO. Subscriptions subject to Customer Agreement available at xmradio. com. XM service only available in the 48 contiguous United States. XM Ready and XM Connect-andPlay are trademarks of XM Satellite Radio Inc. Activate XM Service: Find the 8-character XM Radio ID of the Connect-and-Play antenna. Record the Radio ID here for reference:ssssssss. (Note: The XM Radio ID does not use the letters I, O, S, or F. ) To check the ID of your antenna, See "Checking the XM Radio ID" on page 64. Activate your XM Satellite Radio service online at http://activate. xmradio. com or by calling 1800-XMRADIO (1-800-967-2346). XM will send a signal from the satellites to activate the full channel lineup. Activation normally takes 10 to 15 minutes, but during peak busy periods, you may need to keep your system on for up to an hour. When you can access the full channel lineup on your system, you're done. Each time you press DISPLAY, the display changes as shown. 1 Station name* 2 Frequency** * This is displayed if you have entered a name for a preset station. ** Returns to the original display when several seconds has elapsed. Tuner Functions continued 63US Note · Residents in Canada please see information about XM Canada at the following webpage: (http://www. xmradio. ca/). Receiving XM Radio broadcasts Before tuning, make sure to turn the volume down to minimum. Connecting the XM Radio Before operating the system, connect the XM Connect-and-Play antenna to the XM jack. 1 2 Press FUNCTION +/­ repeatedly until "XM" appears in the front panel display. Press TUNING + or ­ to select a channel. COMPONENT VIDEO IN Y PB/CB PR/CR S VIDEO (DVD ONLY) AM For slow tuning, press TUNING + or ­ briefly. For fast tuning, press and hold TUNING + or ­. Y PB/CB PR/CR VIDEO COMPONENT VIDEO OUT XM MONITOR OUT 3 FM 75 COAXIAL Adjust the volume by pressing VOLUME +/­. XM Jack Note Selecting channels from a category (Category Tuning) You can select a channel from one category or all the categories by changing the category mode. · To ensure optimal reception of XM's satellite signal, move your antenna to various window locations around your home to see where the best reception will be received. Most XM customers place the antenna in a south-facing window with a clear view to the sky. 1 Press CATEGORY MODE repeatedly to select "ONE CAT. " Checking the XM Radio ID 1 2 3 4 Press FUNCTION +/­ repeatedly until "XM" appears in the front panel display. to select channel · ALL CAT : You can select a channel from all the categories. The initial setting is "ALL CAT. " · ONE CAT : You can select a channel from one category. "CAT" appears in the front panel display, when you set to "ONE CAT" mode. 2 Press CATEGORY + or ­ to select the category you want. Check the XM Radio ID in the front panel display. The category is selected and the channel with the lowest number in the specified category is selected. 3 Note Press TUNING + or ­ to select the channel. · When you select a channel in the "ONE CAT" mode, the channel you selected may not be the one in the category you want. This is because one channel may belong to more than one category. [. . . ] M Lights up when the system outputs progressive signals (DVD function only). (29) N Lights up when the HDMI OUT jack is correctly connected to HDCP (highbandwidth digital content protection) compliant device with HDMI or DVI (digital visual interface) input. (27) O Lights up when Super Audio CD/CD is loaded. P Lights up during MULTI channel playback. [. . . ]