User manual SONY DAV-TZ230 annexe 1

[. . . ] ­ Consult the dealer or an experienced radio/TV technician for help. CAUTION You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. Note to CATV system installer: For the customers in the U. S. A This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. Owner's Record This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical. For the customers in Canada CAUTION TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. Except for North American models Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. To prevent fire, do not cover the ventilation of the apparatus with news papers, table-cloths, curtains, etc. And don't place lighted candles on the apparatus. [. . . ] "T--:--:--" appears above "T**:**:**. " Input the time code using the number buttons, then press ENTER. For example, to find a desired point at 2 hours, 10 minutes, and 20 seconds after the beginning, just enter "2:10:20. " 3 Press ENTER or c. Note "** (**)" changes to "-- (**). " 1 2 ( 2 7 ) TITLE12 ­­(34) T 1:32:55 DVD The title, chapter or track number displayed is the same number recorded on the disc. Tip You can change the display to show playing time or remaining time. For details, see "Checking the Playing Time and Remaining Time" (page 44). 4 Press X/x or the number buttons to select the chapter or index number you want to search. If you make a mistake Cancel the number by pressing CLEAR, then select another number. 40GB Viewing Information in the Front Panel Display When playing a DVD Playing time and number of the current title Playing Discs Remaining time of the current title Viewing the Playing Time and Remaining Time in the Front Panel Display You can check disc information, such as the remaining time, total number of titles in a DVD, tracks in a VIDEO CD, CD or MP3, or files in a JPEG using the front panel display (page 75). 4 7 10 5 8 0 6 9 Playing time and number of the current chapter Remaining time of the current chapter Disc name TIME/TEXT Press TIME/TEXT. Each time you press TIME/TEXT while playing the disc, the display changes as shown in the charts. continued 41GB When playing a VIDEO CD (without PBC functions) or CD Playing time and current track number (when playing a CD) When playing a JPEG Current file number File name Remaining time of the current track Notes Playing time of the disc Remaining time of the disc · Depending on the type of disc being played and the playing mode, the disc information may not be displayed. · Only alphabetical letters and numbers can be used for file names. Anything else is displayed as " ". · In the following cases, elapsed playing time and current track remaining time may not be displayed accurately. ­ during fast-forward/reverse. Tips Disc name · When playing VIDEO CDs with PBC functions, only the playing time of the scene is displayed. · The playing time and remaining time of the current chapter, title, track, scene, or disc will also appear on your TV screen. See the following section "Checking the Playing Time and Remaining Time" for details on how to read this information. When playing an MP3 Playing time and current track number Track (file) name 42GB Viewing the Sound Field, Volume Level, or Frequency in the front panel display You can check the current sound field, volume level, frequency, or station name using the front panel display. 4 7 10 5 8 0 6 9 When the system is set to "TUNER AM" or "TUNER FM" Station name*3 Playing Discs Frequency*1 Current sound field*1 DISPLAY Volume*1 Press DISPLAY. Each time you press DISPLAY, the display changes as shown in the charts. When the system is set to "DVD" or "VIDEO" Current sound field*1 *1 Returns to the original display when indicated time has elapsed. *2 When the disc name is displayed in "DVD" mode. They bring the exciting and powerful sound of movie theatres into your home. To select sound field, press AUTO FORMAT DIRECT or MODE on the remote repeatedly until the sound field you want appears in the front panel display. Using only the front speakers and subwoofer (2 CHANNEL STEREO) This mode outputs the sound from the front left and right speakers and subwoofer. Standard two channel (stereo) sources completely bypass the sound field processing. Multi channel surround formats are downmixed to two channels. This allows you to play any source using only the front left and right speakers and subwoofer. Automatic decoding of the audio input signal (AUTO FORMAT DIRECT AUTO) The auto decoding function automatically detects the type of audio signal being input (Dolby Digital, DTS, or standard 2 channel stereo) and performs the proper decoding if necessary. This mode presents the sound as it was recorded/encoded, without adding any effects (e. g. However, if there are no low frequency signals (Dolby Digital LFE, etc. ), it will generate a low frequency signal for output to the subwoofer. MODE 1 4 7 10 2 5 8 0 3 6 9 Press MODE on the remote repeatedly until "2CH ST" appears in the front panel display. Sound field Display 2CHANNEL STEREO 2CH ST AUTO FORMAT DIRECT 1 4 7 10 2 5 8 0 3 6 9 Press AUTO FORMAT DIRECT on the remote repeatedly until "A. F. D. AUTO" appears in the front panel display. Sound field Display AUTO FORMAT DIRECT AUTO A. F. D. AUTO 48GB Selecting a sound field (AUTO FORMAT DIRECT button) Selecting a sound field (MODE button) AUTO FORMAT DIRECT 1 4 7 10 2 5 8 0 3 6 9 1 4 7 10 2 5 8 0 3 6 9 MODE Sound Adjustments Press AUTO FORMAT DIRECT on the remote repeatedly until the sound field you want appears in the front panel display. Sound field Display Press MODE on the remote repeatedly until the sound field you want appears in the front panel display. Sound field Display AUTO FORMAT DIRECT AUTO AUTO FORMAT DIRECT PRO LOGIC AUTO FORMAT DIRECT PRO LOGICII MOVIE AUTO FORMAT DIRECT PRO LOGICII MUSIC A. F. D. AUTO DOLBY PL PLII MOVIE PLII MUSIC 2CHANNEL STEREO ROCK POP JAZZ CLASSIC NEWS SPORTS MOVIE 2CH ST ROCK POP JAZZ CLASSIC NEWS SPORTS MOVIE x AUTO FORMAT DIRECT PRO LOGIC Dolby Pro Logic produces five output channels from two-channel sources. This mode performs Pro Logic decoding to the input signal and output to front, center, and surround speakers. [. . . ] K Changes the angles when playing a DVD. L Changes the subtitle language when playing a DVD. M . />: Press to go to the next chapter or track or to go back to the previous chapter or track. PRESET ­/+: Scan all preset stations. [. . . ]