User manual SONY HANDYCAM DCR-SR45 HOW TO SHOOT A GREAT WEDDING VIDEO.

[. . . ] Install in accordance with the manufacturer's instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. [. . . ] Remove the old battery and install a new one. When daylight saving time begins, the clock does not employ the daylight saving time automatically. · Make sure the clock is set correctly. · Press and hold CLOCK and TIME ZONE/ALARM DISPLAY simultaneously for at least two seconds to employ the DST function. The alarm does not sound at the preset alarm time. · Has the desired alarm been activated?(i. e. , Does the ALARM A (or B) indicator light up?) The radio or iPod alarm is activated but no sound comes on at the preset alarm time. · Make sure the iPod is securely connected. The iPod cannot be operated with this unit. · Make sure the iPod is securely connected. · Make sure the iPod is securely connected. INFORMATION This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. If the battery runs out during the interruption, the current time and alarm functions will be initialized. Replace the battery with a Sony CR2032 lithium battery. Use of another battery may present a risk of fire or explosion. Setting the alarm 2 Press RADIO ON repeatedly to select the desired band. Each press changes the band as follows: The dual alarm function allows you to set two alarm programs (ALARM A and ALARM B). The alarm time can be set for each program and the alarm sound is selectable from RADIO, BUZZER or iPod. Notes · Before setting the alarm, make sure to set the clock (see "Setting the clock and date"). · The factory setting alarm time is "AM 12:00". · To set the radio alarm, first tune in to a station (see "Playing the radio"). 2 Press SLEEP to set the sleep timer duration. Each time you press SLEEP, the duration changes as follows: FM1 FM2 AM 90 60 OFF 30 15 To deactivate the Automatic DST/Summer Time adjustment during the daylight saving time (summer time) period. The Automatic DST/Summer Time adjustment can be cancelled. Press CLOCK and TIME ZONE/ALARM DISPLAY for more than two seconds. The Automatic DST/ Summer Time adjustment will be cancelled. To active the Automatic DST/Summer Time adjustment again, repeat the same operation. Adjust the rear support forward or backward checking the back of the iPod fits snugly against the rear support to protect the connector. FM1 and FM2 are the same frequency bands. 3 Use TUNING + or ­ to tune into the desired station. The FM frequency advances or reverses in 0. 1 MHz channel steps and the AM frequency in 10 kHz channel steps. FM wire antenna Replacing the backup battery 1 Keep the AC plug connected to the AC outlet, remove the screw that secures the battery compartment at the bottom of the unit using a screwdriver, and remove the battery compartment. A-1) Insert a new battery in the battery compartment with the e side facing up. To remove the battery from the battery compartment, push it out from the side marked PUSH. [. . . ] Notes · When placing or removing the iPod, keep it straight and parallel with the rear support. · Do not carry the unit with an iPod set on the connector. · When placing or removing the iPod, brace the unit with one hand and take care not to press the controls of the iPod by mistake. · Do not pull on the rear support strongly as it cannot be detached from the unit and may cause a malfunction. [. . . ]