User manual SONY CYBER-SHOT DSC-W310/B

[. . . ] Table of contents Operation Search MENU/Settings Search Index Cyber-shot Handbook DSC-W310 © 2010 Sony Corporation 4-169-313-11(1) GB How to use this handbook Click on a button at upper right to jump to the corresponding page. This is convenient when searching for a function you want to view. Table of contents Marks and notations used in this handbook In this handbook, the sequence of operations is shown by arrows (t). Operate the camera in the order indicated. Marks are shown as they appear in the camera's default setting. Table of contents Operation Search MENU/Settings Search Index Search for information by function. Operation Search Search for information by operation. [. . . ] · You cannot move recorded images to another folder. 66GB MENU/Settings Search Index Delete REC. Folder Deletes the folder in a memory card that is used to store recorded images. Table of contents 1 MENU t (Settings) t REC. Folder] 3 [OK] t z Notes (Memory Card Tool) t [Delete 2 Select a folder with b/B on the control button. Operation Search · This item is not displayed when the internal memory is used to record images. · If you delete the folder set as the recording folder using [Delete REC. Folder], the folder that has the largest folder number is selected as the next recording folder. · You can delete only empty folders. If a folder contains images, or files that cannot be played back by the camera, first delete these images and files, and then delete the folder. 67GB MENU/Settings Search Index Copy Copies all images in the internal memory to a memory card. Table of contents 1 Insert a memory card with sufficient free capacity into the camera. 2 MENU t (Settings) t t z on the control button Notes · Use a fully charged battery pack. If you attempt to copy image files using a battery pack with little remaining charge, the battery pack may run out, causing copying to fail or possibly corrupting the data. · Images cannot be copied individually. · The original images in the internal memory are retained even after copying. To delete the contents of the internal memory, remove the memory card after copying, then format the internal memory ([Format] in [Internal Memory Tool]). · A new folder is created on the memory card and all the data will be copied to it. You cannot choose a specific folder and copy images to it. (Memory Card Tool) t [Copy] t [OK] 68GB Operation Search MENU/Settings Search Index File Number Selects the method used to assign file numbers to images. Table of contents 1 MENU t (Settings) t (Memory Card Tool) or (Internal Memory Tool) t [File Number] t desired mode t z on the control button Series Assigns numbers to files in sequence even if the recording folder or the memory card is changed. (When the replaced memory card contains a file with a number higher than the last assigned number, a number one higher than the largest number is assigned. ) Starts from 0001 each time the folder is changed. (When the recording folder contains a file, a number one higher than the largest number is assigned. ) Operation Search Reset 69GB MENU/Settings Search Index Date & Time Setting Sets the date and time again. Table of contents 1 MENU t (Settings) t (Clock Settings) t [Date & Time Setting] t desired setting t z on the control button 2 Set the numeric value and desired setting with v/V/b/B on the control button. 3 [OK] t z Date & Time Format Date & Time Note · The camera does not have a feature for superimposing dates on images. By using "PMB" in the CDROM (supplied), you can print or save images with the date. Operation Search Selects the date and time display format. Sets the date and time. 70GB MENU/Settings Search Index Viewing images on a TV You can view images on a TV by connecting the camera to a TV. The connection varies according to the type of TV the camera is connected to. Refer also to the operating instructions supplied with the TV. Table of contents Viewing images by connecting the camera to a TV with the supplied dedicated A/V cable 1 Turn off both the camera and the TV. 2 Connect the camera to the TV with the dedicated A/V cable (supplied). Operation Search MENU/Settings Search 1 To audio/video input jacks 2 To the USB/A/V OUT jack Dedicated A/V cable 3 Turn on the TV and set the input. 4 Press (Playback) button to turn on the camera. Images shot with the camera appear on the TV. Select the desired image with the control button. Notes · When using the camera abroad, it may be necessary to switch the video signal output to match that of your TV system (page 61). [. . . ] · Do not leave the battery pack in extremely hot places, such as in a car or under direct sunlight. · When the battery pack terminals become dirty, the camera may not turn on, the battery pack may not charge, or other symptoms may occur. In these cases, gently wipe away any dirt with a soft cloth. Operation Search MENU/Settings Search How to store the battery pack · Fully discharge the battery pack before storing and store it in a cool, dry place. To maintain the battery pack's function, fully charge the battery pack and then fully discharge it on the camera at least once a year while storing. [. . . ]