User manual SONY CYBER-SHOT DSC-W520

[. . . ] If some trouble occurs while using the battery charger, immediately shut off the power by disconnecting the plug from the wall outlet (wall socket). You can help preserve our environment by returning your used rechargeable batteries to the collection and recycling location nearest you. For more information regarding recycling of rechargeable batteries, call toll free 1-800-822-8837, or visit http://www. For any service or guarantee matters please refer to the addresses given in separate service or guarantee documents. [. . . ] ­ When a fully charged battery pack (supplied) is used at an ambient temperature of 25 °C (77 °F). ⷠThe number of still images that can be recorded is based on the CIPA standard, and is for shooting under the following conditions. ­ The flash strobes once every two times. ­ The power turns on and off once every ten times. ⷠThe battery life for movies is when shooting under the following conditions: ­ Recording mode: VGA ­ When continuous shooting ends because of set limits (page 19), press the shutter button down again and continue shooting. Shooting functions such as the zoom do not operate. Then, insert the battery pack until the battery eject lever locks into place. X Memory cards that you can use Memory Card Memory Stick PRO Duo A Memory Stick PRO-HG Duo Memory Stick Duo B SD memory card SDHC memory card For still images a a a a a For movies a a -- a a In this manual, products in A are collectively referred to as "Memory Stick Duo" media. ⷠIn this manual, products in B are collectively referred to as SD card. ⷠWhen recording movies, it is recommended that you use Class 2 or faster SD cards. X To remove the memory card/battery pack Memory card: Push the memory card in once. Never remove the memory card/battery pack when the access lamp (page 8) is lit. This may cause damage to data in the memory card/internal memory. Date & Time setting is displayed when you press the ON/OFF (Power) button for the first time. It may take time for the power to turn on and allow operation. 3 Select the desired area following the instructions on the screen, then press z t [OK]. Press z in the center of the control button to view movies. 2 Select [This Image] with v on the control button, then press z. Display Indication AE/AF lock ISO number Shutter speed Aperture value Exposure Value AF range finder frame indicator 0EV Indication Battery remaining Low battery warning Image size Scene Selection Shooting mode Scene Recognition icon White balance Metering Mode SteadyShot Vibration warning Anti Blink DRO Smile Detection Sensitivity indicator 96 Other functions used when shooting or playing back can be operated using the Control button or MENU button on the camera. This camera is equipped with GB a Function Guide that allows you to easily select from the functions. While displaying the guide, try the other functions. (Self-Timer): Allows you to use the self-timer. [. . . ] On camera's temperature Your camera and battery may get warm due to continuous use, but it is not a malfunction. On the overheat protection Depending on the camera and battery temperature, the power may turn off automatically to protect the camera. A message will be displayed on the LCD screen before the power turns off. On charging the battery If you charge a battery that has not been used for a long time, you may be unable to charge it to the proper capacity. [. . . ]