User manual SONY DVP-SR760HB.EC1

[. . . ] Do not remove screws, covers or cabinet. Do not expose this appliance to rain or moisture. ATTENTION Afin d'éviter tout risque d'électrocution, d'incendie, etc. : 1. Ne pas enlever les vis ni les panneaux et ne pas ouvrir le coffret de l'appareil. [. . . ] The angle selection window is dismissed. NORMAL Selected preset USER 1 GAMMA BRIGHTNESS +4 +4 +13 +13 +13 +3 +2 CINEMA USER 1 USER 2 NOTE The angle selection window will automatically disappear if you do not change the angle for several seconds. Special picture/sound effect To zoom in pictures CONTRAST SATURATION TINT SHARPNESS Y DELAY Parameter 1 During playback or while paused, press ZOOM. Pressing ZOOM causes the unit to zoom in on the image. At the top left of the screen, the information for the current magnification appears for about 5 seconds. Each time you press ZOOM, the magnification is doubled (1. 8, 4, 8, 16, 32 and 64 times). [NORMAL]: for watching TV in a general room. [CINEMA]: for watching a movie software in a room with suppressed light. [USER 1] [USER 2]: you can adjust parameters that affect the picture character and store the settings as a user preset. See the next step. 3 ZOOM x 4 When a picture of a DVD VIDEO disc is viewed on a normal TV screen (4:3, Letter Box), black bars may appear at the top and bottom of the screen. In this case, if you select the "ZOOM x1. 8" mode, the black bars become almost invisible. When a 1:2. 35 or 1:1. 85 DVD VIDEO source is played back, however, the black bars are visible on the screen. 2 Press 5//2/3 to move the zoomed position. To return to the normal playback Press ENTER. NOTE While zoomed, the picture may look coarse. To adjust the picture character (VFP) · GAMMA Adjust this if the neutral color is bright or dark. The brightness of dark and bright portion is maintained. Available range: ­4 (darkest) to +4 (brightest). · BRIGHTNESS Adjust this if the picture is bright or dark on the whole. (You cannot move to the associated icon when it is not available. ) 20 Advanced operations Menu bar functions for DVD VIDEO Time mode selection During playback, selects the time mode shown in the display window and in the status bar. Press ENTER to select the time mode from the following. · TOTAL: Current title elapsed time · T. REM: Current title remaining time · TIME: Current chapter elapsed time · REM: Current chapter remaining time Menu bar functions for SVCD/Video CD/ Audio CD Time mode selection Selects the time mode shown in the display window and in the status bar. Press ENTER to select the time mode from the following. · TIME: Current track elapsed time · REM: Current track remaining time (while in stop mode, current track total time) · TOTAL: Disc elapsed time · T. REM: Disc remaining time (while in stop mode, disc total time) Repeat mode (See also page 17) Selects the repeat mode during playback. Press 5/ to select the repeat mode from the following. · CHAPTER: Current chapter repeat · TITLE: Current title repeat · ALL: Repeats all the available discs. · A-B: A-B repeat · OFF: Repeat mode deactivated 3. Press ENTER to make the selected repeat function active. Repeat mode (See also page 17) Selects the repeat mode. Press 5/ to select the repeat mode from the following. · TRACK: Current track repeat · DISC: Repeats all tracks on the current disc. [. . . ] ("The Warranty Period") PARTS 1 LABOR YR 90 DAYS THIS LIMITED WARRANTY IS VALID ONLY IN THE FIFTY (50) UNITED STATES, THE DISTRICT OF COLUMBIA AND IN COMMONWEALTH OF PUERTO RICO. WHAT WE WILL DO: If this product is found to be defective, SONY will repair or replace defective parts at no charge to the original owner. Such repair and replacement services shall be rendered by SONY during normal business hours at SONY authorized service centers. Parts used for replacement are warranted only for the remainder of the Warranty Period. [. . . ]