User manual SONY HANDYCAM HDR-CX560V

[. . . ] The actual play time, however, varies among the CDs. You can enjoy two kinds of playback according to the CD type. VIDEO CDs without enjoy video playback PBC functions (moving pictures) as well (Version 1. 0 CDs, for instance, play interactive software using menus displayed on the TV screen, in addition to the usual video playback. [. . . ] Tip You can do the same operation using a VIDEO CD. Each time you press the button, the indication and sound you hear change as follows: Press once twice three times You will hear left channel sound right channel sound stereo sound You can check the operating status of the player and the information about the VIDEO CD on the TV screen. While playing an audio CD, the OSD mode cannot be displayed on the TV screen. â· When you record the playback picture of this player on another VCR, etc. The OSD mode returns to "OSD AUTO" when you turn off the player by pressing POWER or open the lid of the CD compartment. Each time you press the button, the OSD (On-Screen Display) mode changes as follows: When "OSD AUTO" is selected, the operating status appears for a few seconds on the TV screen when you press a button or when the operating status is changed. When "OSD ON" is selected, the operating status is always displayed. various indications displayed on the TV screen Indication PBC ON PBC OFF SELECT + = ) 0 STEREO L-CH R-CH INVALID What it means PBC mode has been switched to ON PBC mode has been switched to OFF Waiting for you to select something (For instance, at the time of menu display) Locating the next or succeeding tracks or scenes Locaing the current or preceding tracks or scenes Searching forward Searching backward Hearing stereo sound Hearing left channel sound Hearing right channel sound Inappropriate buttons were pressed Locating a specific track or scene While playing a VIDEO CD, you can quickly locate any track or specific point in a track by observing the TV screen. Tip When you locate a track or scene numbered over 10, press >10 first, then the corresponding number buttons. Example: To play track (or scene) number 23, press >10 first, then 2 and 3. To locate a specific track or scene directly (when "PBC OFF" is selected) a point while monitoring the picture Press the number button of the track or scene NEXT + (forward) or the PREV = (backward) while playing and hold down until you find the point Playing a VIDEO CD with PBC functions Using the PBC functions , you can play a VIDEO CD with PBC functions (Version 2. Plug the microphone into the MIX MIC jack and turn on the microphone if it has a power switch. Press ST/L/R repeatedly until you can hear the accompaniment from both speakers. To record KARAOKE sound and your voice 1 Insert a cassette for recording. Make sure you turn off the power before making any connections. Video cord Right speaker Left speaker Speaker cord 3 To a wall outlet Note Connect the supplied speakers to this player. If you connect any other speakers or equipment, a malfunction may occur. Connect the AC power cord to the wall outlet. The POWER/STANDBY indicator lights up to indicate when the player is connected to the power source. The indicator lights regardless of whether the power is on or off. Note Be sure to turn off the power of the player before you set the MAIN POWER switch to OFF. To use the VIDEO CD, connect the TV equipped with the video input jack in the following way: 1 Connect the supplied video cord to the VIDEO OUT jack of the player and the video input jack of the TV. [. . . ] â· Remove any obstacles in the path of the remote and the player. â· Make sure the remote sensor is not exposed to strong light such as direct sunlight or fluorescent lamp light. â· Move closer to the player when using the remote. After trying the above remedies, if you still have problems, unplug the AC power cord. [. . . ]