User manual SONY HDR-PJ390E

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

Sponsored Links

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual SONY HDR-PJ390E. We hope that this SONY HDR-PJ390E user guide will be useful to you.

Lastmanuals help download the user guide SONY HDR-PJ390E.


SONY HDR-PJ390E : Download the complete user guide (5706 Ko)

Manual abstract: user guide SONY HDR-PJ390E

Detailed instructions for use are in the User's Guide.

[. . . ] 24 25 26 26 26 27 34 37 38 37 38 37 36 39 38 40 41 42 43 44 43 45 48 5-2. Beam Landing Convergence Focus Adjustment Screen (G2), White Balance . . . . . . . . . . . . . . . . . . . . 21 23 ATTENTION APRES AVOIR DECONNECTE LE CAP DE’LANODE, COURT-CIRCUITER L’ANODE DU TUBE CATHODIQUE ET CELUI DE L’ANODE DU CAP AU CHASSIS METALLIQUE DE L’APPAREIL, OU AU COUCHE DE CARBONE PEINTE SUR LE TUBE CATHODIQUE OU AU BLINDAGE DU TUBE CATHODIQUE. AFIN D’EVITER TOUT RISQUE D’ELECTROCUTION PROVENANT D’UN CHÁSSIS SOUS TENTION, UN TRANSFORMATEUR D’ISOLEMENT DOIT ETRE UTILISÈ LORS DE TOUT DÈPANNAGE LE CHÁSSIS DE CE RÈCEPTEUR EST DIRECTMENT RACCORDÈ Á L’ALIMENTATION SECTEUR. CAUTION SHORT CIRCUIT THE ANODE OF THE PICTURE TUBE AND THE ANODE CAP TO THE METAL CHASSIS, CRT SHIELD, OR THE CARBON PAINTED ON THE CRT, AFTER REMOVAL OF THE ANODE CAP. [. . . ] Refit the inter-connecting leads in their respective purse locks. => => - 13 - 2-4. M Board Removal Clips To remove the G Board release the clips circled and remove the screw from the middle of the board, then ease the board gently away from the support bracket. To remove the M Board gently release the two clips with a screwdriver and remove the board from its socket vertically. 2-6. Wire Dressing 20mm 20mm From M Board To A Board Extender Board Assembly A-1642-293-A If the M Board needs to be removed for testing when the chassis is placed in its service position, it would be necessary to use an extender board and extension cable as indicated above. The Extender board and extension cable are available as a service part by ordering the part number as indicated. Ensure that wires do not touch heatsinks and high temperature hotspots. All wires must be kept at a minimum distance of 20mm away from the EHT lead - 14 - 2-8. Picture Tube Removal 10 8 9 1 WARNING: BEFORE REMOVING THE ANODE CAP High voltage remains in the CRT even after the power is disconnected. To avoid electric shock, discharge CRT before attempting to remove the anode cap. Short between anode and CRT coated earth ground strap. 7 3 6 Coated Earth Ground Strap 5 2 4 1. Unplug all interconnecting leads from the Deflection yoke, neck assy, degaussing coils and CRT grounding strap. Place the set with the CRT face down on a cushion and remove the Degaussing Coil holders. Input a dot pattern from the pattern generator. a a a b b B G B G R Horizontal and Vertical Static Convergence b R Center dot R G B a R G B R G B a V. STAT Vertical Static Magnet H STAT convergence control b b C Board RV702 (H STAT) H STAT Convergence (on mount side) b a R G B a b R B Fig. 3-5 G B G R 1. 2. 3. [Moving horizontally], adjust the H. STAT control so that the Red, Green and Blue points are on top of each other at the centre of the screen. [Moving vertically], adjust the V. STAT magnet so that the Red, Green and Blue points are on top of each other at the centre of the screen. If the H. STAT variable resistor is unable to bring the Red, Green and Blue points together at the centre of the screen, adjust the horizontal convergence with the H. STAT variable resistor and the V. STAT magnet in the manner indicated below. [In this case, the H. STAT variable resistor and the V. STAT magnet influence each other]. Operation of the BMC (Hexapole) magnet. R G B R G B R G B R G B R G B R G B • Tilt the V. STAT magnet and adjust the static convergence by opening or closing the V. STAT magnet. The movement of the magnets interact with each other and so the respective dot position should be monitored while carrying out this adjustment. Use the H. STAT VR to adjust the Red, Green and Blue dots so that they coincide at the centre of the screen (by moving the dots in the horizontal direction). - 18 - Geometry Adjustment. Preparation: Before starting this adjustment, adjust the horizontal and vertical static convergence. Tilt the deflection yoke as indicated in the figure below and optimise the geometry. Tilting the DY Up and Down a small amount will balance the upper and lower pin adjustment. Ensure 4 DY spacers are reinserted YCH Adjustment YCH VR 28" + + YCH VR 32" + + + + Deflection Yoke Deflection Yoke TLV Adjustment TLV VR 28" + + + TLV VR 32" + + + 3. Deflection Yoke Deflection Yoke Screen Corner Convergence If you are unable to adjust the corner convergence properly, this can be corrected with the use of permalloy magnets. a b Tilt Direction a-d: screen-corner convergence defect c d 4. The H-Trap and T-B Pin may not achieve a good level due to a small tilt allowance on the square DY. Keep the DY in a straight position and adjust H-Trap pot (See diagram for HTIL Adjustment) and Y-Mg for T-B Pin, as below. HTIL Adjustment a Install the permalloy assembly for the area that needs correcting. Deflection Yoke Deflection Yoke b APH circuit harness TLV H-Trap YCH TLV H-Trap YCH TLH Piece TLH Piece 28” 32” Permalloy Assy X-4387-214-1 HTIL correction can be performed by adding one TLH correction assembly to the Deflection yoke. c d Convergence adjustment with permalloy • APH Convergence parameter is electrically controlled. (APH = Red vertical lines on the edge of the screen). - 19 - Layout of each control 3-4. [. . . ] R5887 R5888 R5889 R5892 R5895 R5898 R5899 R6200 R6201 R6202 R7007 R7018 R7023 R7034 R7035 R7048 R7050 R7051 R7052 R7053 R7054 R7056 R7057 R7058 R7065 R7066 R7068 R7070 R7071 R7072 R7073 R7074 R7075 R7076 R7077 R7078 R7079 R7080 R7081 R7082 R7088 R7089 R7090 R7091 R7092 R7093 R7094 R7095 R7096 R7097 - 62 - PART. NO 1-216-809-11 1-216-809-11 1-208-806-11 1-216-833-11 1-216-833-11 1-216-832-11 1-216-863-11 1-218-831-11 1-218-839-11 1-249-395-11 1-216-049-11 1-216-025-11 1-216-834-11 1-216-025-11 1-216-025-11 1-216-025-11 1-216-833-11 1-216-025-11 1-216-025-11 1-216-049-11 1-216-847-11 1-218-867-11 1-216-842-11 1-216-049-11 1-216-821-11 1-216-809-11 1-218-877-11 1-216-817-11 1-216-817-11 1-216-817-11 1-216-041-00 1-216-043-91 1-216-817-11 1-216-041-00 1-216-043-91 1-216-817-11 1-216-041-00 1-216-043-91 1-216-817-11 1-208-782-11 1-208-783-11 1-216-819-11 1-216-819-11 1-216-819-11 1-216-295-91 1-216-295-91 1-216-295-91 1-216-295-91 1-216-803-11 1-216-803-11 DESCRIPTION METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP CARBON RES-CHIP RES-CHIP METAL CHIP RES-CHIP RES-CHIP RES-CHIP METAL CHIP RES-CHIP RES-CHIP RES-CHIP METAL CHIP METAL CHIP METAL CHIP RES-CHIP METAL CHIP METAL METAL METAL METAL METAL CHIP CHIP CHIP CHIP CHIP 100 100 10K 10K 10K 8. 2K 3. 3M 220 470 15 1K 100 12K 100 100 100 10K 100 100 1K 150K 6. 8K 56K 1K 1K 100 18K 470 470 470 470 560 470 470 560 470 470 560 470 1K 1. 1K 680 680 680 0 0 0 0 33 33 REMARK 5% 1/10W 5% 1/10W 0. 5% 1/10W 5% 1/10W 5% 1/10W 5% 5% 0. 5% 0. 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 0. 5% 5% 5% 5% 5% 0. 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 0. 5% 0. 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/4W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W RES-CHIP METAL CHIP CARBON CARBON METAL OXIDE METAL METAL RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP METAL CHIP METAL CHIP METAL CHIP RES-CHIP RES-CHIP METAL CHIP METAL CHIP METAL METAL METAL METAL METAL CHIP CHIP CHIP CHIP CHIP RES-CHIP RES-CHIP METAL CHIP RES-CHIP RES-CHIP METAL CHIP RES-CHIP RES-CHIP METAL CHIP METAL CHIP METAL METAL METAL METAL SHORT SHORT SHORT SHORT METAL METAL CHIP CHIP CHIP CHIP CHIP CHIP CHIP CHIP CHIP CHIP 5% 5% 1/10W 1/10W VM F5 A REF. NO. R7098 PART. NO 1-216-803-11 < FILTER > SF1001 1-795-617-11 < CRYSTAL > < RESISTOR > X1001 X2000 X3200 X5800 1-767-704-11 1-760-628-11 1-781-946-21 1-767-127-11 VIBRATOR, VIBRATOR, VIBRATOR, VIBRATOR, CRYSTAL CRYSTAL CRYSTAL CERAMIC R5300 R5303 R5318 R5327 R5334 R5335 R5340 R5400 R5407 R5410 R5417 R5803 R5877 R5878 R5883 R5890 R5891 R5893 R5894 R5896 R5897 R5335 R5340 R5400 R5407 R5410 R5417 R5803 R5877 R5878 R5883 R5890 R5891 R5893 R5894 R5896 R5897 1-208-818-11 1-216-057-11 1-216-848-11 1-216-854-11 1-208-798-11 1-208-798-11 1-216-861-11 1-216-821-11 1-218-844-11 1-216-861-11 1-218-823-11 1-218-903-11 1-216-845-11 1-218-823-11 1-218-903-11 1-218-823-11 METAL CHIP RES-CHIP METAL CHIP METAL CHIP METAL CHIP METAL METAL METAL METAL METAL METAL METAL METAL METAL METAL CHIP CHIP CHIP CHIP CHIP CHIP CHIP CHIP CHIP CHIP 33K 2. 2K 180K 560K 4. 7K 4. 7K 2. 2M 1K 750 2. 2M 100 220K 100K 100 220K 100 0. 5% 5% 5% 5% 0. 5% 0. 5% 5% 5% 0. 5% 5% 0. 5% 0. 5% 5% 0. 5% 0. 5% 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1-208-822-11 1-208-822-11 1-208-818-11 1-243-525-11 1-208-834-11 1-208-824-11 1-216-049-11 1-216-849-11 1-216-857-11 1-216-665-11 1-216-665-11 NOT FITTED 1-216-829-11 1-216-049-11 1-216-857-11 NOT NOT NOT NOT NOT FITTED FITTED FITTED FITTED FITTED METAL METAL METAL METAL METAL CHIP CHIP CHIP OXIDE CHIP 47K 47K 33K 33 150K 56K 1K 220K 1M 3. 9K 0. 5% 0. 5% 0. 5% 5% 0. 5% 0. 5% 5% 5% 5% 0. 5% 1/10W 1/10W 1/10W 3W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W SAW FILTER CN1001 * 1-766-296-41 CONNECTOR, DUAL SCART DESCRIPTION METAL CHIP 33 REMARK 5% 1/10W REF. NO. C5853 C5868 PART. NO 1-162-968-11 1-164-004-11 DESCRIPTION CERAMIC CHIP 0. 0047UF CERAMIC CHIP 0. 1UF REMARK 10. 00% 50V 10. 00% 25V < CONNECTOR > A Board Variant Parts KV28CS70 < CAPACITOR > C5320 C5321 C5853 C5868 1-129-716-00 1-136-347-11 1-162-970-11 1-163-129-00 FILM 0. 015UF 5. 00% 630V FILM 0. 0047UF 5. 00% 630V CERAMIC CHIP 0. 01UF 10. 00% 25V CERAMIC CHIP 330PF 5. 00% 50V METAL CHIP RES-CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP RES-CHIP METAL CHIP 3. 9K 0. 5% 1/10W 4. 7K 5% 1K 5% 1M 5% 1/10W 1/10W 1/10W < CONNECTOR > CN1001 * 1-766-296-21 CONNECTOR, DUAL SCART < RESISTOR > R5300 R5303 R5318 R5327 R5334 1-218-873-11 NOT FITTED 1-208-806-11 NOT FITTED 1-218-901-11 METAL CHIP METAL CHIP METAL CHIP 12K 10K 0. 5% 1/10W 0. 5% 1/10W 180K 0. 5% 1/10W NOT FITTED A Board Variant Parts KV28CS70B < FILTER > SF1003 1-767-083-11 < TUNER > TU1001 8-598-623-10 TUNER, FSS BTP-AC421 FILTER, SURFACE WAVE A Board Variant Parts KV28CS70E < FILTER > SF1003 NOT FITTED < TUNER > TU1001 8-598-623-10 TUNER, FSS BTP-AC421 METAL CHIP 0. 5% 1/10W A Board Variant Parts HDR-PJ390E A Board Variant Parts KV28CS70U < CAPACITOR > C5320 C5321 1-129-817-00 NOT FITTED FILM 0. 022UF 5. 00% 630V SF1003 - 63 - < FILTER > NOT FITTED H5 A VM REF. NO. PART. NO DESCRIPTION < TUNER > TUNER, FSS BTP-AU621 REMARK REF. NO. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SONY HDR-PJ390E

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SONY HDR-PJ390E will begin.

Search for a user manual

 

Copyright © 2015 - LastManuals - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.

flag